WriteLog
[Top] [All Lists]

Re: [WriteLog] M2 mult station setup

To: "'Kostas SV1DPI'" <sv1dpi@otenet.gr>
Subject: Re: [WriteLog] M2 mult station setup
From: "Stein-Roar Brobakken" <post@lb3re.com>
Date: Wed, 15 Jun 2016 16:16:36 +0200
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Hello

 

Yes, for  Multi TWO is needed following function in WLOG:

1.       Tracking of bandchange , like in Multi Single

2.       Possible add 1-2 Support/Mult station 

In N1MM/Win-test you can swap between each station from S&P (Support/Mult) 
station into RUN 1 or RUN2. 

N1MM you can do it with one commando  ALT-CTRL-M.

You can work in scenario between RUN1 and Mult 1 station this way, until you 
filled you x Number of allowed bandchanges.

In N1MM you can SWAP VFO in SO2R mode ALT-F5

In Multi Mode with N1MM:

Alt-Ctl-M Changes Run1/Run2. It says to use this every time you open a 
Multi-2 contest, and also during Contest.

 

Today you can do it hard way in WLog with edit the cabrillo file after the 
contest :P

 

 

73s LB3RE Rag 

 

From: Kostas SV1DPI [mailto:sv1dpi@otenet.gr] 
Sent: Tuesday, June 14, 2016 9:44 AM
To: K3RAG LB3RE Brobakken <post@lb3re.com>
Cc: [WriteLog] <writelog@contesting.com>
Subject: Re: [WriteLog] M2 mult station setup

 

Tnx for the reply.

This is what I have understand also. That it works only manually. With this 
chance and while I join my voice with you for an update on this one, I suggest 
a major update on how we setup the category in general. I believe that it would 
be better to have one window where we will choose the category and all these 
related with the category. It is really difficult for the average user to find 
the menu with the seperate serials, the "log which radio makes the qso", the 
band changes (right click on the window now), etc. It would be much better to 
have a menu with all these options, plus to setup the additional radios if are 
inband radios or mult radio to run1 station or mult to run2 station, etc.

...73 de Kostas SV1DPI
  (One of SZ1A-EP6T)

On 13/6/2016 11:34 μμ, K3RAG LB3RE Brobakken wrote:

Hello
Setup M2=

You must set first network.
Then set serial by Band.
Then identify which radio is which one to log this.
Radio 1 is 0 in cabrillo
Radio 2 is 1 in cabrillo.
If running 3rd mult station you must edit thisone manually in cabrillo to 1 or 
0 after contest.

There is no tracking of bandchange in M2 in Writelog... i asked like 7 years 
for this....

73 LB3RE Rag

mandag, 13 juni 2016, 00:05a.m. +02:00 from kostas sv1dpi sv1dpi@otenet.gr 
<mailto:sv1dpi@otenet.gr> :




We want to use Writelog in M2 category in contests like cq wpx. It is 
allowed to have 2 signals on the air every time.

Our plan is to have 2 running stations and 1 multiplier station.

Example: The 2 running stations will be on 15 and 20m for example and 
the multi station on 10 or 40m.

It's allowed 8 band changes for every station. So the multi station (if 
the run has a good rythm) can get maximum 4 stations every clock hour 
for the run1 and 4 more for the run2.

How can I say to writelog that the mult station is used as mult1 (mult 
for the run1 station) or mult2 (mult for the run2) station every moment 
to be according the allowed band changes?

73 Kostas SV1DPI


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com 
<https://e-aj.my.com/compose?To=WriteLog@contesting.com> 
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/

 

No virus found in this message.
Checked by AVG - www.avg.com <http://www.avg.com> 
Version: 2016.0.7639 / Virus Database: 4604/12417 - Release Date: 06/14/16

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/
<Prev in Thread] Current Thread [Next in Thread>