Good Morning, All: I'm having a problem with the PTT line being asserted when CT is started. Often, nothing will clear it. To diagnose the problem, I installed DOS 6.22 on a newly formatted partition
Hi Ken: I'm using an SO2R master in this test. It uses a transistor connected to Pin 16 of LPT1. This goes through a relay controlled by Pin 14 and drives a 12V relay for PTT out. When I get home, I'
Hi Ken: Okay, John Evans (N3HBX) has confirmed that the problem is NOT defining "CW Port" in the initial setup screens (or the .bin file). It appears that there is a problem with radio 1/2 initializa
Hello, all: I've never set up a system with a DVP before, for use with TRLog and CT. The default IRQ for the DVP is 7, which is also the default IRQ for LPT1. Do these peacefully co-exist? If you are
Hello all: I'm involved in converting an SO2R setup from using an internal DVP to an external DVK with CT, driven from the LPT port. Obviously, recording from the keyboard won't work! :-) My "best gu
Good afternoon, all: Has anyone tried installing TWO DVP's in a single computer under DOS? This would be for use with TRLog and CT. Only one DVP would be used at a time. It looks like I can change th
Good evening, all: I checked the archive and found a thread on the ByteRunner PCI serial cards. There was some discussion, but no resolution. I have installed one of their dual serial cards in a newe
Hi Bill: The COMTSR program only knows about IO addresses that are in the ISA address space. I believe it can't deal with the PCI addresses. Some of the PCI cards, notably the ByteRunner PCI200-L, co
Good afternoon: I tried the "Two DVP's in one computer" experiment yesterday, using CT 10.004 for DOS. I configured both DVP's with IRQ7, moving the base address of one of them (using a jumper) from
Good afternoon: I spent quite a while yesterday fiddling with a ByteRunner dual PCI serial card. The good news is that it works fine with both CT and TRLog under DOS, using the VSEMUIO program provid
Good evening: I have had the opportunity to do more testing with the SCKII and CT10.004. John Evans, N3HBX, and I have had problems with the SCKII going into record modes or otherwise acting strangel
Hi Ken: Thanks for the update. After our experience at the W3AO Field Day, I would like to ask whether we can get two more additions to ct.cfg: 1. Band - set band for startup. This would be great for
Hi all: I saw this too...random things filled in for the category and not the section on stations that had not been previously worked. I was operating SSB. Seemed to happen more late in Field Day tha
Hello, All: This was happening to me on stations that HAD NOT been worked before and were not in the log. Only the category was entered...the section stayed blank. Weird... Mark _____________________
Hi Jon: I have successfully used WinTelnetX with TR-Log. The setup is a Windows box, talking to the cluster using telnet and connected to the DOS box running, in my case, TR-Log using a Null-Modem ca
Good morning, all: I have figured out a procedure for taking a Windows XP computer, even a laptop, and installing MS-DOS on it. This allows a dual boot (just pick whether you want Windows XP or DOS)
Good morning, again: I have had several requests for the draft procedure for setting up a Windows XP computer to dual-boot DOS. I wanted to provide a bit more information, answering the most common q
Good day, all: Doug Freestone, VE5UF, has successfully created a dual-boot system using the procedure I sent him! :-) He is going to continue to help me improve and clarify the procedure notes. Also,
Good day, all: As part of my "cookbook" for dual booting XP and DOS, I'd love to be able to run CT and TR from FreeDOS. That would allow doing lots of really neat things, including distributing boota
Good day, all: Thanks to everyone who looked at and made comments on my dual-boot procedure for Windows XP and DOS. So far, three people have successfully managed to dual-boot XP and DOS, one was not