Does this mean that Orinoco will not be using the AP/AS-2000 to replace the AP-1000? It always looked to me that it was an AP-1000 w/ bigger/faster proc in it. Not so? What is Orinoco planning on doi
where do you want to filter them? At the AP? Router? If you have a Cisco router at your edge I can tell you how to just pull down their usage of bandwidth instead of blocking them entirely. That way
where do you want to filter them? At the AP? Router? If you have a Cisco router at your edge I can tell you how to just pull down their usage of bandwidth instead of blocking them entirely. That way
To me the border is the place to filter.. to save you time here is the pertinent portions of a config I just did (this is IOS 12.2 by the way), my comments are prefaced with ##.. E-mail me with quest
On a related topic, may I suggest that everyone with a Cisco router at the border of their network that is running IOS 12.x inlclude the following to help prevent Nimda virus propogation: class-map m
Quick version of question: Can a KarlNet ISP Base link up with another KarlNet ISP Base? Long version if I am unclear above: Can I do the following: Tower 1: 3 sector antennas hooked up 1 sector per
Aren't there functional differences between the ISP Base software and the Satellite? I want all the routing and RADIUS stuff on all of my APs. I want to route as much as possible (as opposed to bridg
http://www.pcpowerandcooling.com/products/redundant/twin_dual_pwr/index. htm I have a question for you guys using PC's with Karlnet... There are two things that break in a PC from my experience. 1) H
Hey, he asked a question, I provided an answer :) I once used their AT 'redundant' power supply that fit into a statndard AT power supply space.. Was like $350 if I remember right (was like 3 years a
I have not seen an exhaustive list of KarlNet clients and APs listed.. It is probably out there somewhere, but I haven't seen it. Here is what I know is available: KarlNet firmware works on: Orinoco
I think they tried that and had some serious performance issues with it.. also from a support standpoint it seems from what I have heard that a single ethernet interface to your customer would be eas
Man, that is a whole lot of latency.... A question to someone who has not yet deployed TC (but is planning on it): is the max link speed of a TC network 5.5mbps instead of 11mbps? I thought that ther
If he is talking about lowering your AGGREGATE bandwidth available to ALL customers down to 3.2mbps then that is something to think about.. If you are doing residential or something, no big deal.. Bu
I have a couple of quick questions: Is there a (cheap) single user KarlNet software for the RG-1000/RG-1100 ? Is the Lucent WavePOINT II AP the same hardware as the Orinoco AP-1000? Will it run the s
Here is my thinking: I can pick up a RG-1100 for $150 at any of several places (http://shopper.cnet.com/shopping/resellers/0-11644-311-6632196-3.html?fl=0&tag=st.sh.11644-311-6632196.sort.price), if