You can't use the public feature on the configurator.... It has never worked that I know of... It would be nice if it would but it never has for me. Nate I am having problems getting it to work, if a
I have one installed at my house and it works great. And you can check the signal strength from the Base Station. The Signal Statistics don't work via the http interface. They just don't have a readi
Posting a URL for the document might be better, it appears that the list strips the attachment. Nate All, Karlnet does have a design document for people wanting to make enclosures for our boards. I h
You can also open your configurator and select File>Open Remote Config>Scan and if the radio shows up in the scan list you can select it and then click Change IP. Nate Hi there yeah, I tried that. wh
CABLE LOSS my friend...... Here is a link so you can see the amount of cable loss for different cable. http://www.timesmicrowave.com/cgi-bin/calculate.pl Nate I have a 2.4 GHz antenna that uses LMR40
I talked to Reggie @ Karlnet about it and I was told that the first batches of RG+ boards didn't have the temperature sensor on it. But the newest ones do.... Nate --Original Message-- From: karlnet-
FYI - You can usually see the temp if you Monitor the device and click on Remote Statistics. I would attach a jpg but the mailing list will stripe it. Nate --Original Message-- From: karlnet-bounces@
Im sorry. I screwed up. I meant to say you can see the temp on a flashrom unit. And the newest RG+ boards as well. Sorry for the confusion Brett..... Nate --Original Message-- From: karlnet-bounces@W
Ya I have Mikrotik 200mW radios working in a few flashroms.... You just can't upload the bin file while there in the unit. You have to use Orinoco/Agere/whatever radios to get them setup. Nate Any th
Sounds like you bought it from Charles.. ;-) There isn't an actual manual that I know of....... But there is some content on them at http://www.karlnet.com/Product/systemBoard/ProductWPBASE.htm Nate
Howdy Guys!! You can have up to 3 radio interfaces and 1 ethernet. If you buy the HF-600 Flashrom Module. KN also has a HF-500 module that is a 2 port version... It is a waste as far as I'm concerned
I have done it on the beta versions and I would actually doing from from 2 states away with the way it worked the past few times i have done it. It works great.... Nate So what is everyone's confiden
Be my guest... ;-) Ive done it and it works fine... Maybe you can try it from your vehicle so you can fix it if you screw it up... ;-) But it does work quite nice.... Nate he he.... I just upgraded 3
I would think you could do a remote upgrade of the bin file once it is on there... You might have to cross your fingers and hope it uploads fine though... :-( Nate Can anyone clarify if these low cos
Charles Wu sells the Motorola Canopy power supplies with POE for $10 each. Nate I am looking for a low cost power supply for the WPCPE+. I use POE at lengths up to 150ft. Don ________________________
If you have the license(SR-4250) already then use it. But otherwise buy the new KN wpbase board or AP1000. The license costs the same price. And you can support more users. Nate I was wondering if an
I see this same problem on a flashrom unit I have that has 3 sectors. I monitor a client on each sector and I have the EXACT same problem. My outage is NEVER on all 3 sectors at once. And it happens
Tony, That statement isn't true... I have some flashrom units that have 4 interfaces... 1 Ethernet & 3 Radio Interfaces. But you have to buy the 4 Port Flashrom Module (HF-600). And the SF-4300 licen
I don't really have any problems with them locking up anymore. But I have had the deaf base station problem that Reg has sent me the fix for and it has just about solved all my problems. I will say t