I have one installed at my house and it works great.
And you can check the signal strength from the Base Station.
The Signal Statistics don't work via the http interface. They just don't
have a reading. But you can still check everything by doing a wireless link
test from the AP.
Nate
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Brett Hays
Sent: Tuesday, July 01, 2003 8:31 AM
To: Karlnet Mailing List
Subject: [Karlnet] Ubicom and Configurator
Based on the posts I have seen the last week or so, I am confused about the
new ubicom clients and link tests. Can anyone confirm whether there is any
way of doing a link test with these clients. I hear the one built into the
firmware is not available and it is not possible to view one from the access
point to the ubicom in configurator? How are those deploying these checking
on signal?
Thanks.
Brett Hays
Hometown Online
www.htonline.net
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|