HF-600 Flashrom Module - 4 Port for Generic Motherboard - Base Station $67.00 + shipping It connects to your Primary IDE port on your motherboard and works in conjunction with the XN-700 (Ethernet Ca
http://www.karlnet.com/Support/SupportDownloads.htm Nate Hi there I'm just waiting to arive my first two RG-1000s that we managed to buy and test with BASE & Satelite Karlnet software. if what I read
I dont know what regulator the RG has on it but I use 15vdc power to them all the time on long cable runs. And I also run the RGs with batteries as well and the chargers that I use put out about 14vd
Yes the WPBASE+ has 2 radio slots and 2 ethernet slots. You would need to get a SG-4200 license though. And no it isnt the base station license.... It is the same license format as all the other radi
I looked through the archives and didn't see anything about this. But what is the difference in these boards other then the name? Nate McLain Chisholm Trail Networks LLC nate@ctrail.net http://www.ct
It works great like this Shane!! You can use some fairly cheap cable/dsl routers for around $40. And it will allow unlimited users. I wouldn't put 500 users behind it but it works great for residenti
Charles, Do you have these in stock currently?? If so I'm ready to order a few. Nate Full Version WPAP+ / WPBASE+ SPECIFICATIONS CPU ST-PC Elite @ 133MHz BIOS KarlNet Optimized, PC-compatible, in Fla
I have been using the ones from Mikrotik. http://www.mikrotik.com They work pretty good. But the SNR, Signal, & Noise don't work. But I haven't tried upgrading the firmware lately.... Nate so where i
I have a problem similar to this but I'm using Flashrom units. I ping certain customers on different sectors and I get the exact same thing. I won't be able to ping a customer from anywhere around 1-
I have used a Shuttle Spacewalker motherboard with a flashrom unit and they have a built in speaker and it clicks when data is being transferred. I think it would be awesome to be able to align the a
Is there any documentation on these new boards? I got my hands on one of the new boards and there isn't any info with them at all. What are the jumper settings, etc.... Nate
What is the maximum number of users that can connect to a WPBASE? I'm assuming that you just flash these new boards with the AP-1000 Software (SA-4400). So I assume that you can still only connect 64
I can tell ya... I have called tech support and if you don't talk to Reggy then your wasting your time. He does an outstanding job. I have also called with some SEC questions and didn't get to talk t
Are there any plans for KN to sell a simple plastic backplate for the new boards that are shipping? It would be nice to be able to have them made out of plastic and have the ability to isolate the bo
Well I guess a injection mold wouldnt be so cheap.... :-) And I don't need to get to the compact flash today. But I might in 6 months who knows... And with mounting radios in outdoor enclosures it is
I was looking around on Karlnets site. They have a small sound bite on there site about a new line of embedded systems boards, KN-50, KN-100, & KN-200. Does anyone have any info about these? Nate
Ok, I have a WPBASE+ and after I have flashed it I just get a Green Power light on LED5. And then 4 Red LEDs on the rest. And I can't scan it with the configurator. If I put it back in base boot mode
I was looking around on Karlnets site. They have a small sound bite on there site about a new line of embedded systems boards, KN-50, KN-100, & KN-200. Does anyone have any info about these? Nate
Ok, I have a WPBASE+ and after I have flashed it I just get a Green Power light on LED5. And then 4 Red LEDs on the rest. And I can't scan it with the configurator. If I put it back in base boot mode