Could be On Foot! Ive got to get the power company back out once the virus passes. Primary for my neighborhood ends on one of the poles in front of my house. When it gets low humidity and anything ov
My friend had same issue with his oven (not sure of brand) with RFI on 10 meters. The manufacturer sent out a tech with a cable that had a ferrite around the wires, not looped through and it did noth
I am using a Netgear Nighthawk R7000 v2 router with Fresh Tomato aftermarket firmware. No issues with the router resetting (locates about 35 feet from a G5RV used QRO on 40 meters. Also no discernibl
Nice write up Scott. Once the pandemic winds down I have to have JCP&L (just crummy power and light) come back out. I am 99% sure it is the insulator on the pole in front of my house. It is the end o
Bose Companion 2 series III are RFI quiet here. Dave wo2x Sent from my waxed string and tin cans. _______________________________________________ RFI mailing list RFI@contesting.com http://lists.cont
While slightly out of your price point the Flex 6000 series radios wide noise blanker does wonders on powerline noise. I have a few videos on YouTube. The 7300 noise blanker is more effective on impu
Duh! I stand corrected :-/ check foot position before opening mouth. Here is a link to one of the videos. There are several on there. https://youtu.be/2bijDWL6lEI 73 Dave wo2x Sent from my waxed stri
I never hide anything from my wife. I can honestly say she is my best friend! 31 years and counting :-) If she ever found out I tried to hide something from her ....... Dave wo2x My XYL does fabric
I wish my wife would take interest in ham radio. She just calls it a party line for geeks. Dave wo2x My having an Extra Class XYL into DX certainly helps. She's insisting on re-doing everything from
Gentlemen, I want to thank everyone for their insights and contribution to this list. I have been getting power line noise for a few years here. It is pronounced when sunny and dry then wind picks up
Medtronic will answer your question. Reach out to them and ask to speak to their EMI group. My doctor wanted me to get an ICD from them. What feedback. I received did receive said 30 feet minimum, bu
They recommend 2.5 amps for a Pi4 Dave wo2x Sent from my waxed string and tin cans. _______________________________________________ RFI mailing list RFI@contesting.com http://lists.contesting.com/mai
Hi Chuck, Thanks for the detailed description of your problem and how you were able to find it. I have power line noise prevalent when dry and windy. You can watch the noise floor jump up and down. W
This discussion has been very informative. I need to get the power company back out. One of two poles on my property has the HV for our neighborhood terminate on it. On dry breezy days I get bad arci
I've had success opening the battery modules in some APC units and replacing the batteries. I did that in two 2200VA units here in my house. Dave wo2x After reviews of past posts on RFI reflector for
I/d be curious on what gaming console. I just got an Xbox Series X but havent noticed RFI as I am not on the radio when playing:-) I can run the radio from the iPad and test Dave wo2x Sent from my iP
Hi All Thought I would share this. I've been plagued with powerline noise for years, especially bad on 15 and 40 meters. The Flex Radio wide noise blanker does magic on it as long as the noise is con
Looking at the triple ceramic dead end insulator that came off the pole, the first two insulators were white where the third was brown. Looking at the two white ones, on each of the two the material
I've got two local houses that appear to be potentially causing interference. But recently (last week) I am getting constant wide band noise on all HF bands. 10 dB increase on 40, 13 dB increase on 1
I have seen this once with an older light & controller on one of the County 220 towers. We upgraded the tower lighting when the tower was strengthened to an LED system and the issue cleared. I dont h