Yes, the 3 digit number goes in the QTH column, and you're right, you don't get an "unknown mult" warning like you do for a prefix if you leave out the serial number and space over to the country fie
A fair question. I don't know what the "old way", or "present form" means, but I do think it would be nice if WL used the ARRL list of abbreviations that Dave Henderson put on their site: http://www.
Maybe I spoke with "foot in mouth" in my last post. I got to thinking, (finally), the abbreviations in the Multipliers Menu can be changed by going to the WriteLog folder and editing the "namedmul.in
For a basic primer, get RTTY Basics by W7TI at:: http://www.qsl.net/ok1rr/rtty.html For setting up RTTY with WriteLog, you can't beat the following: http://www.geocities.com/writelog Don, AA5AU's fin
Not wishing to take away from the the discussion of the Bandmap preferences, I would very much like to ask again for the Sub-RX support, especially for the FT1000D radio mentioned by Don below. This
This was covered pretty well last year after the JARTS test. If you have access to the WL Archives, look at the Oct. 2001 postings, do a search by title, and look for "Jarts Log Submission". You shou
I have downloaded version 10.35E which shows Cabrillo Support for SARTG in the Update History. When I look at the Cabrillo File option in the Contest menu, it's still grayed out. Anybody tried it out
Thanks Jerry, I also have delayed filing to see if the fix could be installed before the deadline. The two patches you refer to are explained in the Download section of WL. You have to scroll down qu
There's really not enough information to help you at this point. Your problem may not be with writeLog at all. Questions that come to my mind are: 1. By upgrading the motherboard I assume you install
Have you tried that for the SARTG? When I do it, (by the way, it's called "Parameter Setup") I get the contest score sheet, and that's all. No place to enter Name or Location. I checked some old cont
It seems it depends what source the rules came from. I have the rules from SM3CER Contest Service http://www.sk3bg.se/contest/sartgtty.htm which states: "The Cabrillo format is preferred." This is th
OK, Don, I'm a bit confused on this one. I've read your fine tutorials r.e. MMTTY Settings on your web page and found that if the "Rttyrite MMTTY Settings" are set right, the AFC won't come on in the
Adding my second to this advice. If your computer has an ISA slot, (rare in the latest models), the SB 16 ISA is a good choice. I've never had any problem with any WL function with mine. I purposely
John and Larry - I originally put out a post on the Extigy back on Feb. 17, 2002, I thought it looked like a possible solution to a second sound card on the USB. Jon Harder actually got one and tried
Al - Don't know the answer to question 1, but on #2, are you using WL version 10.32E by any chance? If so are you aware of the mis-numbering of com ports in the Port set-up window? Port numbers are o
CQ, Is anyone using a RotorCard RS-232 rotor controller by Bob Locker's (W9KNI) Idiom Press with Writelog? These are for the Yaesu DXA series rotors. They are reported to be compatable with the Hy Ga
I would like to know how to disable the "All mode PTT on CW port RTS" option in the Setup/Ports menu. The box always comes up checked, I un-check it, save the configuration and exit WL. The next time
Thanks to the several who responded with ideas. I attached Steve's only because he suggested that it didn't sound like Writelog that caused the problem. Turns out you're right, Steve, but it does fix
Maurizio - The very first thing to try is: Click on "Bands", then click on "LSB is really FSK". Try that and if that doesn't do it, let us know and we'll try something else. Good Luck, Don W6FFH rece