I certainly did. It certainly wasn't in ver 11.xx Is there a reason for this? Steve, K6UM _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.co
I sent this to the LP-PAN reflector a few days ago, but didn't receive any responses. Does anyone on the WriteLog reflector have a solution? Steve, K6UM I've had this problem for a long time and wond
That didn't work for me with 12.09F. It always starts with 16 wpm, even if that is not one of the available speeds. What version are you using? Steve, K6UM ___________________________________________
Thanks, Randy, that was the problem. I'm using a Winkeyer USB and the speed control was set to 16wpm. I had not checked the box to ignore the it, so it was using it for the start up value. Steve, K6U
Wow, thanks! I hate the horizontal format with the overlapping calls, and calls off the screen. Took a little fiddling around to get it to go vertical, but I love it. I don't remember seeing this in
Since the beginning I have wondered why the RTTY decode window uses a circular buffer with the most recent decode moving down the screen until it is at the bottom of the window and then it jumps to t
I've been running WSJT and WriteLog for over a year in the VHF contests. My only issue is that I would like WriteLog to work like N1MM+ and grab the Qs from WSJT and put them automatically in the log
This weekend's FT8 RU seems to be a success. But, we also need the UDP Listener to work for the ARRL VHF contest, which is two weeks after the ARRL RTTY Roundup. FT8/MSK144 make up over 90% of my VHF
You also need to be running the latest version of the UDP Listener, which I believe is version 8; not the earlier version 3. My procedure: Run WriteLog UDP Listener. Run WSJT-X and enable ADIF broadc
UDP Listener worked fine for me in the VHF contest. It doesn't care about which contest is running. That's under the control of WSJT-X. As for dupe checking, FT8 is so slow that it is not difficult t
I ran into problems when using WSJT-X in FD mode on 6m. None of my 6m FT8 Qs were scored. The problem was that WSJT-X was sending out incorrect information on the UDP port, but I'm not sure what Writ
I was unable to upload either the Cabrillo or the ADIF files for the WWROF digital test. It had fits either way with confusion with the gridsquare and signal report, which wasn't being sent (Grid squ
I just did the WWROF digital test using WriteLog (12.42) with DigiWrite (1.1.18). and had import issues into DX4WIN. All of the DigiWrite QSO produced import errors for Submode FT4. Earlier I had imp
I was able to confirm the problem is with the WriteLog ADIF. I edited the WriteLog ADIF to move Submode after Mode as is done in the WSJT-X ADIF log. The file imported into DX4WIN with no problems. I
DigiRite worked well during last weekend's ARRL VHF Contest with one exception: It does not support MSK144, which is used for meteor scatter. I was inconvenient to switch between DigiRite for FT8 and
Well, I didn't have full success. The XDft build ended with the following error: The command "copy C:\digirite-build\binWin32\*.dll C:\Users\Steve Lund\source\repos\Digi-Rite\Digi-XDft\Win32\Release\
Just installed WriteLog 12.47A. How do I turn off the winkeyer sidetone that is driving me crazy. Pressing the red (command) button on the winkeyer, then sending an A used to fix this. That doesn't s
Ed, It doesn't work for me, either. I even ordered and installed the latest Winkeyer IC. If you want the Winkeyer sidetone ON select Winkeyer; if you want it OFF select Winkeyer2. Steve, K6UM On Sun,
I'd like to have the Summary Sheet work for WPX, too. I believe this is the only contest that it doesn't support a summary sheet. It did years ago as I have copies of those summary sheets. I use the