THe speed (4800) is set in the SETUP window when CT runs. You must specify -8N2 for all Yaesu radios however. _______________________________________________ CT-User mailing list CT-User@contesting.c
Once you install CtWIN like any other windows program, you can hook up your Pro II to the com port. Then on the com port setup menu specify radio 1 and the speed. Set the Pro to a speed, avoid using
Do you have a cty.dat file in your CT directory? _______________________________________________ CT-User mailing list CT-User@contesting.com http://lists.contesting.com/mailman/listinfo/ct-user CT on
Are you running CTwin or Dos? You have to set the speed of the radio in the OTHERS menu. Also activate transceive option in that menu. In DOS run COMTSR1 before starting CT. Use the SETUP command to
I used fix_mine a couple of times during and after the contest with no problem. Make sure when you run these utilites to just execute them first with no file name. That way you will get the info line
CT_TIME will add or subtract a fixed number of minutes from every QSO. Just type CT_TIME to get the proper syntax. It is CT_TIME <logfile> minutes _______________________________________________ CT-U
The 9 signifies that it works with CT version 9. The internal file formats changed in version 10. I doubt it works. You could use 10to9.exe to convert back to 9 and use it. I don't think that there w
Are you set up as a non single op contest? I think that it is easier to run PC in CTWin (if it can do windows) and just run telnet. _______________________________________________ CT-User mailing lis
What was the entire line 50 of your log? _______________________________________________ CT-User mailing list CT-User@contesting.com http://lists.contesting.com/mailman/listinfo/ct-user CT on the web
What version of windows do you run that you don't have access to a command shell? The C2A program still runs in a command prompt under any version of windows that I know of. _________________________
Will you be running DOS? Probably not. USB isn't supported under DOS and you won't find drivers. If you are running CTWin, then you can buy a custom device to do the keying or a USB to port adapter (
_______________________________________________ CT-User mailing list CT-User@contesting.com http://lists.contesting.com/mailman/listinfo/ct-user CT on the web: http://www.k1ea.com/
I believe that there is a new file on the website that has all this. Go to http://www.k1ea.com/CT_additions.htm _______________________________________________ CT-User mailing list CT-User@contesting
There is also a sample ct.cfg file on the ct website at: http://www.k1ea.com/hints/cfg.htm John k3ct@verizon.net I believe that there is a new file on the website that has all this. Go to http://www.
The MYGRID command sets the variable for the Cabrillo output. It does not dynamically change your grid in the log. For a good logger for rovers, try, appropriately enough, ROVERLOG. _________________
With CT DOS you need to load COMTSRx.EXE for the specific COM port. Have you loaded this before starting CT DOS? Is the serial port on the laptop enabled and working? ________________________________
SETLAT and SETLON See info on website or the ct.hlp files _______________________________________________ CT-User mailing list CT-User@contesting.com http://lists.contesting.com/mailman/listinfo/ct-u
If you have to use Windows to close the program, you are not using DOS. DOS CT runs in DOS, not in a shell within Windows. If you have any Windows except XP or later, then you have to boot into DOS.
There are two ways to connect four computers using serial ports. The first method requires that two of the computers have two serial ports. PC1/sp1--PC2/sp1 PC2/sp2--PC3/sp1 PC3/sp2--PC4/sp1 The othe
Did you use the merge utility for V10? _______________________________________________ CT-User mailing list CT-User@contesting.com http://lists.contesting.com/mailman/listinfo/ct-user CT on the web: