The FOC Marathon is coming up on 2/1. Has anyone built a WriteLog template for it? I have developed a FOCMaster.dta file for anyone who needs it. Tom, K5RC
--part1_92.2013a5da.297b06fb_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit My W9XT card works okay with WriteLog but it has its problems. It does move the memo
--part1_28.1f940761.294fe9f4_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit There were a number of opportunities I noticed for improvement in WriteLog's 10M tem
--part1_95.14ae4c07.29520ed5_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit If the threads on the reflector would stick to WL issues without beating up on those
--part1_e4.1ff87600.29560557_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit I installed 10.69 last night and now my WX0B SO2R box works as advertised. No more C
--part1_111.7fba0ae.291aa204_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit During CW SS, K7BV's log managed to gain 18 QSO numbers. Starting at #174 and at ran
--part1_15b.464203b.292c70ae_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Great advice if you can get the computer noise and echo effects out of the sound car
--part1_54.1c77ea17.28fe0a9f_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit You simply use the contact closure for "record". If you have the W9XT cables, there
--part1_32.1cc287ec.2907ad9d_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit I am using WriteLog with the WX0B SO2R Box. I have LPT1 configured for CW and LPT2 c
Me too. Also, a number of times WL sent "TTT" instead of the serial number when the call sign field was not completely filled out. Is this a feature? Other than that, it was a hoot. It is the first t
"The rules I read does not say a 3 digit number etc...only a number..." "...plus a progressive QSO number starting with 001." Are we reading the same rules?? Tom, K5RC
I am getting very exasperated trying to find the answer to daily logging using the same program I use for contesting. I need two-radio control, which lets out DX4Win. For years, I have used NA Daily
First, if this message makes it to the reflector, it will be after a month of trying to figure out how to send plain text mail over AOL (version 6 is HTML). If you are reading this and you are an AOL
I currently use WL with an early vintage W9XT board. I want to upgrade the voice keyer and I want to stop the crummy CW generated by the computer. I also have an Array Solutions SO2R box, so the W5XD
Don't obsess over the Shetlands, Falkands, Zone 17, Zone 18 issues. Just log the zone as sent by the operator. The cabrillo file doesn't use country file data and the logs will be scored correctly by
Using 10.42C during NAQP SSB I would get random "WL Sound performed an illegal operation and will be shut down" messages, maybe once every two hours. The system had to be warm booted to restore. On t
In a message dated 1/28/2004 3:45:12 PM Pacific Standard Time, writelog-request@contesting.com writes: would like to hear from anyone who has used one of these devices, specifically if you used the L
After a lot of aggravation during SS CW, I finally discovered that the "CW_ON_PIN1=1" command only works for LPT keying. My laptop uses USB to COM adapters and XP Pro. Any similar fix for un-trashing
LPT port and serial ports 3&4. $20 or so at CompUSA. I've had good success with Belkin and Keyspan brands of USB to serial adapters. Tom Taormina, K5RC Virginia City, Nevada Contesting from the Comst
I've loaded WL 10.50 on my laptop for the second station. Everything works great, except using the internal sound board for a voice keyer. Regardless of where I set the level controls, there is an ob