Author: David M Holligan <david.m.holligan@rraz.net>
Date: Mon, 01 Sep 2003 13:45:30 -0700
How about accessible via SNMP? At 04:06 PM 8/31/2003 -0500, you wrote: I am working with an engineer who is working on an ethernet connected monitoring solution. This device will be able to monitor a
Author: David M Holligan <david.m.holligan@rraz.net>
Date: Mon, 21 Jul 2003 16:49:26 -0700
We have some working in flashroms. Several are PTP links, and one serving some customers on an omni with no amp. The cards are 200mw Zcomax cards. (XI325HP) Are you looking for more specifics? Dave A
Author: David M Holligan <david.m.holligan@rraz.net>
Date: Mon, 12 May 2003 16:06:17 -0700
What radios and firmware versions are you running in the flashrom that had these problems? Thanks Dave At 07:53 AM 5/12/2003 -0500, you wrote: I don't really have any problems with them locking up an
Author: David M Holligan <david.m.holligan@rraz.net>
Date: Tue, 29 Apr 2003 13:14:45 -0700
Jumper J3 is the magical one. Should be on or closed for normal operation, off or open for base boot mode. At 02:00 PM 4/29/2003 -0300, you wrote: Hi: How to "force reload" a Karlnet Flash Rom unit ?
Author: David M Holligan <david.m.holligan@rraz.net>
Date: Fri, 06 Dec 2002 19:44:55 -0700
If you mean motherboards, try the Gigabyte GA-8ixxx series with a 1.6-2.0 ghz processor in the board. 256mb RAM is more than enough. These run with three wireless cards, the ethernet card with bootro
Author: David M Holligan <david.m.holligan@rraz.net>
Date: Fri, 25 Oct 2002 17:03:40 -0700
That's an UNDERSTATEMENT. We pulled it off all our equipment after having random lockups. One AP running with one radio card had the ethernet port lockup, and would only start responding again after
Author: David M Holligan <david.m.holligan@rraz.net>
Date: Sat, 26 Oct 2002 12:11:03 -0700
We did have problems before the radio cards (orinoco gold) were flashed to 8.10 (MONTHS ago) but it's been fine since. HTH Dave At 22:09 10/25/2002 -0400, you wrote: David, have you ever had lockup p
Author: David M Holligan <david.m.holligan@rraz.net>
Date: Sat, 26 Oct 2002 12:16:41 -0700
We have one AP1000 that shows much higher throughput with the 4.27 compared to 4.02, but also locks up about once every 24 hours. A link test shows a weak link, but after a power cycle, it works fine
Author: David M Holligan <david.m.holligan@rraz.net>
Date: Fri, 14 Nov 2003 11:42:29 -0700
When will the RADIUS feature be returned? Thanks Dave David Holligan Red River Wireless, a division of Red River Communications 2011 McCulloch Blvd, Suite 8 Lake Havasu City AZ 86403 Phone: 928-505-2
Author: David M Holligan <david.m.holligan@rraz.net>
Date: Fri, 14 Nov 2003 11:42:29 -0700
When will the RADIUS feature be returned? Thanks Dave David Holligan Red River Wireless, a division of Red River Communications 2011 McCulloch Blvd, Suite 8 Lake Havasu City AZ 86403 Phone: 928-505-2
Author: David M Holligan <david.m.holligan@rraz.net>
Date: Wed, 14 Jul 2004 16:39:22 -0700
I've seen it fewer times since 4.45, but still do see it. Dave Caleb Carroll wrote: Who is still experiencing this "feature" with v4.45 firmware? ** REPLY SEPARATOR ** On 2004-07-14 at 3:00 PM Dan Me