Re: [Karlnet] 4.27

[David M Holligan <david.m.holligan@rraz.net>]

That's an UNDERSTATEMENT.

We pulled it off all our equipment after having random lockups.  One AP 
running with one radio card had the ethernet port lockup, and would only 
start responding again after a powercycle.    Other APs would stop 
responding to clients (RG1100's) for a period of 30 seconds to two minutes, 
but would come back to normal on their own.

We did not see any apparent problems with it on our flashrom unit with 
three radio cards, but considering the problems on the APs, we flashed back 
to 4.02 on that as well.

We did not have these problems before going to 4.27, nor have we seen any 
of them since flashing back to 4.02.

If anyone has any suggestions, or questions, let me know.

Dave

At 15:39 10/25/2002 -0500, you wrote:

> I've got a few RG's on it...it appears to be working alright.. I've heard it
> isn't working well on AP-1000's though.
>
> ----- Original Message -----
> From: "Rob Trout" <rtrout@t-speed.com>
> To: <karlnet@WISPNotes.com>
> Sent: Friday, October 25, 2002 3:27 PM
> Subject: [Karlnet] 4.27
>
>
> > Could I get some feedback on 4.27? What is everyone's experience so far?
> >
> > Robert Trout
> > T-Speed
> > rtrout@t-speed.com
> > (office) 214.237.3388
> > www.t-speed.com
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet