Well finally see some light at the end of the tunnel! I cleaned out the WASP nest of comport (both hardware and virtual) thanks to the guidance provided on the rttycontesting.com (courtesy of AA5AU -
Well you are probably right, but it was only after I took it to FSK that I could assign the comport for the Winkey, otherwise it would say it would open a dialog box saying "Can't open comm port for
It seems that Writelog v12.35c is by default docking all windows. I have been unable to local the settings for turning Docking on or off. any help here? Jim/KC4HW ____________________________________
Thanks for Jeff/WK6I, Doug/K6HGF and Don/AA5AU for the information on docking! Jim/KC4HW hi Jim - In the newer versions of writelog, you just click-hold the window header and drag it outside to the d
Writelog 12.42G DigiRite 1.1.23 The entry window is not populating, however the log is recording the QSOs... Any help here? Jim/KC4HW _______________________________________________ WriteLog mailing
Thanks Don! Jim/KC4HW This is normal operation when using DigiRite. Nothing will populate the entry window. The entry window is only used if you want to type in a frequency to QSY to. You don't even
Writelog 12.42G DigiRite 1.1.23 Trying to follow the instructions on the ReadMe.htm for updating the Exchange Format Setup to add the GRID and DGTL columns. I was able to insert the new columns but w
Ok, this worked for me! In CQ mode those answering my CQ were going correctly, but those that I selected from the left pane were not until I made this below change. Thanks! Jim/KC4HW My newbie questi
OK, I exit DR and then WL and let it rest a minute and then retarted WL and DR and made the edit to the Exchange Format Setup and it took, so guess I just need to start the program. Anyway the GRID a
Writelog 12.42G DigiRite 1.1.23 Module General DXCC tracking log keeper DigiRite-1: Setup mode: FT8 and Exchange: Grid Square & dB Report CQ: On idle I have a screen snip that I could include but I d
Writelog 12.42G MMTTY 1.68a MicroKeyer/uRouter 9.1.5 Just checking and trying to get my station setup for WW RTTY.. When I hit F1 "test kc4hw " appears in the RttyRite window, after a couple of secon
Hey Kevin, thanks for the help. Now for the diddle issue for some reason and I don't know why, I obviously had deleted the comport in uRouter for the FSK setup. Reset that and then rebooted the syste
Well Keith very good suggestion, I tried to modification for the message but it had not effect on the delay. Thanks Jim/KC4HW -- Original Message -- From: Keith Beebe W3KB <keith@w3kb.net> To: Kevin
Been using DigiRite with the General DX record keeping--all seems to be OK. After WW DIGI, while using the General DX module, my default CQ message was "CQ DX KC4HW EM71". Have been playing with the
Hey Thanks Ed, Don and Randy! Yeah I was a bit off on my contest CQ but the software was sending the correct configuration. I will adjust the F11 and check the focus box when needed. Thanks for the g
GM All, Well this has been interesting. Bottom line: Works! both FT8 and FT4. OK, thanks to all that responded to my request for help. Jim/KC4HW -- Original Message -- From: Don AA5AU <aa5au@bellsout
Environment: Writelog 12.42G - One radio only: FT-2000D MicroHam, Microkeyer uRouter 9.1.5 Setup, currently operational on CW, RY, DIGI I do have a microphone plugged into the port on the back of the
So enlight of the recent insurgent of FT8/FT4 and other digital modes, what is the band plan for RTTY? Jim/KC4HW _______________________________________________ WriteLog mailing list WriteLog@contest
I am using a MicroHam MicroKeyer (MK) with a Heil Headset connected to the mic input on the MK connected through to the radio. This appears to be working because I can speak into the mic and the radi
Be sure that you have clicked inside of the "Log Entry" Window. If you click outside of the entry window, then you may have to click inside again. Jim/KC4HW -- Original Message -- From: ke6qr <ke6qr@