Mail Archive Search: <+from:k4vud@hotmail.com>

Results:

References: [ +from:k4vud@hotmail.com: 269 ]

Total 269 documents matching your query.

1. [Amps] Titan quits query (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Wed, 24 Jun 2009 11:22:21 +0000; Ten Tec Titan, the first model, was operating ok on 20 m ssb. I switched to CW, same drive power (40w) and when I looked a few seconds later at the amp, it was completely off. Now, it does not come o; /archives//html/Amps/2009-06/msg00107.html (7,478 bytes)
2. Re: [Amps] Titan quits query more (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Sat, 27 Jun 2009 06:51:02 +0000; Thanks for your thoughtful reply. So far, I have 220VAC on the power supply input socket, and all three of the fuses are ok. The two on the rear are ok and the fuse originally located down in the mid; /archives//html/Amps/2009-06/msg00126.html (7,456 bytes)
3. [Amps] 8874? (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Wed, 1 Jul 2009 02:34:57 +0000; about 20 yrs ago, I bought a Dentron DTR-2000 for $800. I figured I bought the tube (which is what a new one went for then) and got the amp for free. It drives so easily and puts out POWER.... great; /archives//html/Amps/2009-06/msg00150.html (8,821 bytes)
4. [Amps] Roger's complete correction on tubes (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Wed, 1 Jul 2009 11:01:20 +0000; Good job Roger, Yep, I could not remember correctly, strangely enuf. I like my DTR-2000 Dentron but it is just what Dentron wanted to put out, hi power amps for small money (relatively). Everything a; /archives//html/Amps/2009-07/msg00002.html (12,471 bytes)
5. [Amps] SB-220 had two (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Thu, 2 Jul 2009 03:17:15 +0000; Heath SB-220/230 used TWO 3-500z. Charles Harpole k4vud@hotmail.com _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/; /archives//html/Amps/2009-07/msg00033.html (11,053 bytes)
6. [Amps] Power switch (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Thu, 2 Jul 2009 03:21:48 +0000; Open terminal knife switches are the thing. Very impressive to youngsters who visit the shack. Charles Harpole k4vud@hotmail.com _______________________________________________ Amps mailing list Amps; /archives//html/Amps/2009-07/msg00034.html (7,681 bytes)
7. [Amps] Hunter "Bandit" (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Thu, 9 Jul 2009 06:46:45 +0000; Yes, Virginia, there certainly was a Hunter "Bandit" sold to hams. I saw one, but never operated one. It was a bargain in its day-- based on price, anyway. 73, Charles Harpole k4vud@hotmail.com _____; /archives//html/Amps/2009-07/msg00136.html (12,533 bytes)
8. Re: [Amps] HT-33A (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Sat, 25 Jul 2009 02:33:53 +0000; I'd say $300 for users and $800 to collectors. Problem with all old rigs are old caps. Best idea is just change them all out at once and relax. My Ten Tec Titan I power supply has cap problems, I cha; /archives//html/Amps/2009-07/msg00330.html (8,776 bytes)
9. Re: [Amps] Alpha 76PA Plate Current (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Fri, 31 Jul 2009 03:12:59 +0000; My friend and I fixed my 76PAC (the P must mean 3 tubes, and the C indicates a hypersil xfmer) on the meter circuit but we can't remember what we did... Nevertheless, into a dummy load, at 1500 out,; /archives//html/Amps/2009-07/msg00424.html (9,019 bytes)
10. [Amps] spray painting metal (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Fri, 31 Jul 2009 04:05:59 +0000; My dad, the furniture man, taught me how to spray paint with a pro gun or just with a spray can. The tricks include 1. run the spray on and sweep past the end of the material (the rig case) so that u; /archives//html/Amps/2009-07/msg00426.html (7,189 bytes)
11. Re: [Amps] Alpha 374A ? (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Mon, 3 Aug 2009 01:31:59 +0000; The 374 is a lot like the 76a, if I remember right. If so, the 374 manual tuning will cover 3-30mc just fine. Alphas have been sold to science and testing labs and for diathermy (sp?) everywhere and; /archives//html/Amps/2009-08/msg00035.html (8,976 bytes)
12. [Amps] why a 200 watt transceiver? (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Mon, 3 Aug 2009 02:11:04 +0000; If u have a choice, buy the 200 watt version of a radio. Two good reasons... -Amazing how much 200w does that 100w does not. Double power seems to have 4X the results. Don't know why, but it really h; /archives//html/Amps/2009-08/msg00038.html (6,794 bytes)
13. Re: [Amps] 240V Outlet (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Mon, 10 Aug 2009 02:31:58 +0000; I always use #10 wire in this application and then use an electric dryer fixture for the plug and socket on the wall. The pig tail end of the dryer cord (opposite the molded plug) goes to my operatin; /archives//html/Amps/2009-08/msg00190.html (12,857 bytes)
14. Re: [Amps] I need transfer switch information (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Mon, 10 Aug 2009 08:05:55 +0000; Hey, watch out... u will be powering the whole grid if not careful. Seriously, what about using an automatic change over that also starts the generator. I have seen nice units that do this and cost c; /archives//html/Amps/2009-08/msg00209.html (8,567 bytes)
15. Re: [Amps] 240V Outlet and money (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Mon, 10 Aug 2009 08:10:58 +0000; I get a kick about guys who worry about the pennies of extra expense in bigger wire when they probably spent $10,000 usd on their gear and antennas... or more. That is like the guy I saw with a miser; /archives//html/Amps/2009-08/msg00210.html (8,823 bytes)
16. [Amps] house wiring in Thailand (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Mon, 10 Aug 2009 08:34:04 +0000; Thailand is 100% 220-240VAC. I have never seen a home here wired with more that the equv. of #16, two wire going to everything. Nothing built before about 2000 has any grounds at all. Plug in the bra; /archives//html/Amps/2009-08/msg00212.html (6,928 bytes)
17. [Amps] amp advice from Alpha (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Sun, 27 Sep 2009 03:39:11 +0000; Interesting that my Alpha literature says that I should run my Alphas on HIGH POWER (high voltage) all the time, I forgot why. Also it says that it is better to leave the amp on (on standby) than tur; /archives//html/Amps/2009-09/msg00345.html (8,022 bytes)
18. Re: [Amps] Vernier dials, have one but... (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Sun, 4 Oct 2009 03:21:54 +0000; i bought mine from Allied Radio in about 1962 to gain some fine tuning on my Space Spanner regerentative control. If you remember all of that, YOU ARE OLD. Of course, what you want was a common item; /archives//html/Amps/2009-10/msg00053.html (9,183 bytes)
19. [Amps] SWR meters (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Mon, 5 Oct 2009 04:45:11 +0000; The DX Zone has a huge list of SWR meters. But, it does not list my favorite, Autek WM-1 which has dual meters (not cross eyed) and peak hold, too.I have had no trouble with my 3 units, but u do have; /archives//html/Amps/2009-10/msg00077.html (13,788 bytes)
20. [Amps] amp list (score: 1): Author: Charles Harpole <k4vud@hotmail.com>; Date: Mon, 5 Oct 2009 05:55:49 +0000; My amp list: Alpha 87aAlpha 76 PACDentron DTR-2000Titan IICOM IC-2KL (quan. 3). Had additionally all at one time, but sold off:SB-230Henry 2K floor consoleTL 922National NC-2000 second 87a First amp.; /archives//html/Amps/2009-10/msg00081.html (11,436 bytes)

Current List: 1 - 20
Page: [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14]