Hello all, I am in the process of making an so2r station ph, cw and rtty as well. (pair of FT-920's, wx0b six-pack, w9xt decoder boards, ice filter, dual monitors, 5 com ports, etc) I was wondering h
I too am hoping for a simple solution. I have a pair of ft-920 yaesu's as so2r, work fabulously. I also have an IC-746 that I got to work only once by adding com info to the writelog.ini file in the
Hello all, Is there a way to cause the cursor in the serial number field to default to the far right instead of the far left? Example: During Nov SS pressing the spacebar jumping to the different fie
Thanks Gary and everyone who responded, Mine did already work in VERY small increments but be advised to those wishing to try this is that you must be clicked on the QSO entry window box when you scr
Hi Al K0AD, Related to your problem. I have three desktop computers with SIIG quartet rs-232 boards. I have never had a failure with rig control or tnc's in kiss mode. I am about to hook my D-700A ap
BTW Al; Pending on the SIIG card you should be able to go into Control Panel, and Hardware Devices, Com Ports and change Com 5,6,7 and 8 to Com, 2,3,4 and 5 since you already have Com 1 on your mothe
Al K0AD, As I said, I would report my findings back to you. I tried Com 3 (S2 on the SIIG card dongle) The Kenwood software wrote to the D-700A AOK. Clay Melhorn N9IO Bonfield, IL Webmaster: KARS - K
Me too. Also, if you want to disconnect before closing out just type bye All of the line commands for AR-Cluster can be found at http://www.ab5k.net/ArcDocs/UserManual/ArcUserManual.htm a good read a
BTW: When using some of these querie commands you would be fine to them when connected via telnet, but if you're connected via RF (Packet) you are best advised to not try them during a contest but on
Honestly Bill I don't play with colors in Writelog mainly because for instance the bandmap colors have great significance and since on occasion I operate at friends stations you really don't want to
Hi Gary, I had a similar problem during sweepstakes. I had some serious RF issue that caused me to lose com a few times and a screwy number entered for freq and of course the "red B" showed up. I re-
A few win 7 questions for the group. I had purchased a laptop for the xyl for Christmas with win7 (32) on it for general internet browsing, 13.3" LED backlit display 3gb and 320 hard, VERY long lasti
Thank you to Jim VA3HJ and John N1JM for responding so quickly. This is all good news and a great start. I know Win 7 is VERY new so this may be very premature in development but here is yet another
I too run the DXDoubler and Writelog. A great parallel port control software for Win7 is Port95nt it can be downloaded at http://www.driverlinx.com/DownLoad/DlPortIO.htm SIIG makes some very nice qua
Now that the subject came up let me also ask for a heads up. My IC-746 non pro rig connection constantly drops during the contest. First I used an interface I built myself now I picked up a usb versi
Hello to the group, Am hoping someone will know if there is a writelog.ini issue or what it is I may need to do here concerning use of my MFJ-1274 tnc with our club's robust rf cluster node for spott
Hello All, Here is my last gremlin. I have had an IC-746 for a few or more years now non-pro that I pretty much only use for the 2m end of vhf contests while I use an FT-920 Yaesu on 6m. Only interes
Thankyou so much for the input to Don AA5AU Winford W8XC Mark WA9IVH Hans K0HB Ron N0AT Gary AL9A Chuck N6KW Fact is I tried pretty much all that was suggested that's why it was so confusing. Even tr
Hello Wayne, One more item to check into if you would please. I reported this a few versions back but thbe problem persists. Cluster window only prints gibberish as if the TNC were in command mode (M
((Forgot to add the OS is XP Pro, P4 2.66, 2GB Ram.)) Hello Wayne, One more item to check into if you would please. I reported this a few versions back but thbe problem persists. Cluster window only