Our Australian supplier has said that YDI will no longer supply the KN105 boards on their own. They are moving to selling the complete units. I agree that is a real shame. We have a fairly large Karl
The other issue with pre built gear is the shipping. For us in Australia, getting pre built antennas shipped from the US to Australia is very expensive. We prefer to source our antennas locally and i
Hi All, We have recently commissioned a new site with licensed microwave gear for backhaul. All this sort of gear and our routers use -48v ie, the neutral & earth is positive. We plugged in a KN-205
The KN-205 can take 48v through the POE only. I am quite sure it did short off the grounded antenna lead. Getting around the problem is the issue at the moment as l need to run Karlnet on the site, a
We use using a Veritech (Saneo) card and it could be putting out a real voltage as you say. I have a couple of dead (but still powering on) KN-50's l thought l would test with in the hope that they a
Wow! The card l have is toast, but surprisingly enough there wasn't any of that "you have let the smoke out" smell. BTW, I've had 15 amp fuses blow when I connected the pigtail. The cards were toast
KN-50's also take 48v through poe only We use using a Veritech (Saneo) card and it could be putting out a real voltage as you say. I have a couple of dead (but still powering on) KN-50's l thought l