- 1. [Amps] plate collet??? (score: 1)
- Author: "Randy S." <rj3819@yahoo.com>
- Date: Wed, 5 Jan 2011 17:54:27 -0800 (PST)
- What is a plate collet? Randy _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
- /archives//html/Amps/2011-01/msg00038.html (6,179 bytes)
- 2. Re: [Amps] plate collet??? (score: 1)
- Author: Paul Decker <kg7hf@comcast.net>
- Date: Thu, 6 Jan 2011 20:44:06 +0000 (UTC)
- It is also known as an anode collet. Basically it's a ring of finger stock which makes contact on the tubes plate. Collets are also used in the metal/ceramic power tubes on the grid ring. You woul
- /archives//html/Amps/2011-01/msg00040.html (7,675 bytes)
- 3. Re: [Amps] plate collet??? (score: 1)
- Author: "Carl" <km1h@jeremy.mv.com>
- Date: Thu, 6 Jan 2011 17:05:19 -0500
- For the 3CX800 its actually a stainless ring that fits over the tube with a push and lock in place arrangement. It has 3 L legs with screw holes welded to it that anchor to the matching chimney. Both
- /archives//html/Amps/2011-01/msg00041.html (9,409 bytes)
- 4. Re: [Amps] plate collet??? (score: 1)
- Author: "Roger (K8RI)" <sub1@rogerhalstead.com>
- Date: Thu, 06 Jan 2011 17:39:12 -0500
- What about using the collet (anode ring ) from the GU74B? Would it fit? There is one currently on e-bay http://cgi.ebay.com/GU74B-Anode-Ring-and-Teflon-Air-Shield-/330509657662?pt=LH_DefaultDomain_0&
- /archives//html/Amps/2011-01/msg00042.html (7,851 bytes)
- 5. Re: [Amps] plate collet??? (score: 1)
- Author: "Carl" <km1h@jeremy.mv.com>
- Date: Thu, 6 Jan 2011 20:13:14 -0500
- Its worth measuring anyway Carl KM1H _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
- /archives//html/Amps/2011-01/msg00050.html (8,539 bytes)
This search system is powered by
Namazu