Its worth measuring anyway
Carl
KM1H
----- Original Message -----
From: "Roger (K8RI)" <sub1@rogerhalstead.com>
To: <amps@contesting.com>
Sent: Thursday, January 06, 2011 5:39 PM
Subject: Re: [Amps] plate collet???
>
>
> On 1/6/2011 5:05 PM, Carl wrote:
>> For the 3CX800 its actually a stainless ring that fits over the tube with
>> a
>> push and lock in place arrangement. It has 3 L legs with screw holes
>> welded
>> to it that anchor to the matching chimney.
>>
>> Both parts are complicated and pricey like all things Eimac.
> What about using the collet (anode ring ) from the GU74B? Would it fit?
> There is one currently on e-bay
> http://cgi.ebay.com/GU74B-Anode-Ring-and-Teflon-Air-Shield-/330509657662?pt=LH_DefaultDomain_0&hash=item4cf3e9263e
>
>
> 73
>
> Roger (K8RI)
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|