Ok....I dumped Vista, and returned to XP. Still need help in getting the Orion to track with and send CW via Writelog (latest version). Can someone using this setup tell me how they have it configure
In Writelog, ("ports") assuming COM1 is connected to your rig, you want: COM1 - no CW - no DVK - rig=Ten Tec Orion - Baud=Auto - "Poll" checked - Comm PTT=no Then I have COM2 communicating with my Ri
I think he was looking for someone who is keying the Orion through the serial cable that connects a COM port directly to the rig. I still don't know that this can be done, though someone posted that
Thanks Larry, and Duane. I'll configure it in the morning. I will also try using my SignaLink USB interface to key the laptop keyboard and WL for CW exchanges. I have it successfully working AFSK and
Below: [N5GE] That was probably me. If you download the Programmer's Guide from the Ten-Tec web site you can read about how it is done, but you will need to know how to program in some language like
The Orion Programmer's Reference Guide rev 1.2 p 34 gives the info on how to send CW from the serial port using the "/" command. Use any method you like to generate the commands - your favorite progr
Thanks, Martin. I had read the manual but had not tried it, so that's good information. Tom, N5GE Tom, N5GE http://www.n5ge.com http://www.eQSL.cc/Member.cfm?N5GE ____________________________________