Could anyone please help? I have recently aquired a Tentec Omni 6 plus which appears to be in good condition.However I soon discovered there is a fault which manifests it's self on 30 meters only.At
Hi Sandy, The Omni VI uses a bunch of crystals in an oscillator as part of the local oscillator system. There would be one crystal for each band, were it not for the fact that a few of them are used
Ken, Thanks for the email.I may need your notes.I will be intouch again soon. Again thanks.Veryhelpful. Sandy Hi Sandy, The Omni VI uses a bunch of crystals in an oscillator as part of the local osci
Jack, Check the TenTec Reflector archives. This problem has been extensively discussed in the past and many suggestions made. As I recall, all I had to do to cure mine was slightly detune the 20mHz o
You can get the 30 meter oscillator locking to the reference by adjusting the inductor for the 30 meter crystal, or by adjusting the reference. If you choose the latter, I strongly recommend checkin
Did that and check again regularly. 73 Don K5AQ _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
As I almost went down the Omni 6 plus road do I read correctly that a modern transceiver competing in the same price arena as the Icom Pro or the FT 1K series not only chirps but requires regular twe
Author: "CSM\(r\) Gary Huber - AB9M" <glhuber@msn.com>
Date: Thu, 25 Feb 2010 13:52:17 -0600
Regarding the Corsair II and PSK-31. I don't have any problems using my last production run Corsair II on PSK-31. What drift there is from cold start to stable is about 200 Hz over twenty minutes. ht
I have the same result. When I come in the shack I turn on the radio right away. Then by the time I'm finished fiddling around and getting things ready, its all warmed up. I've sat and watched the wa
Can't disagree with that Gary. I was running a Corsair-1 when I bought the JST135 and at that time was into Clover demanding a high degree of frequency stability which the Corsair could not handle bu
Mci bcp yrs below Walt. Like many, I've never owned a rig from new and have never bought using the original price tag as a parameter. My Corsair-1 I bought because I heard it on the air, cw qso G3KQS
Some guys have been using the crystal oscillator in the Corsair remote PTO for PSK. My Corsair seems pretty stable after warm up, but I haven't used it on PSK, though I tweaked the temperature compen
Author: "CSM\(r\) Gary Huber - AB9M" <glhuber@msn.com>
Date: Sun, 28 Feb 2010 20:29:33 -0600
With four XTAL positions in the remote VFO, that would be a reasonable option. _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/ma