Hi, Anyone know how to define the default CW speed at start up so one has not to do it all over every time you launch WL? I run SO2R so doing it on both radios would be attractive. 73s Kari SM0HR ___
Kari, Open the Setup menu, then choose "Ports...". In the dialog that comes up, use the left-right arrows in the top right corner to scroll to the right until you can see the tab "CW Speeds". Select
Hi, Anyone know how to define the default CW speed at start up so one has not to do it all over every time you launch WL? I run SO2R so doing it on both radios would be attractive. 73s Kari SM0HR ___
This was just covered a week or so ago. You can find the post here: http://lists.contesting.com/pipermail/writelog/2018-March/038923.html After you finish, be sure to Save Configuration. 73, Don AA5A
That didn't work for me with 12.09F. It always starts with 16 wpm, even if that is not one of the available speeds. What version are you using? Steve, K6UM ___________________________________________
I have been using WL since 1999 (not sure what version that was). My CW always defaults on start-up to the value that is in the first box of the second row of the CW Speeds Dialog. What device are yo
Thanks, Randy, that was the problem. I'm using a Winkeyer USB and the speed control was set to 16wpm. I had not checked the box to ignore the it, so it was using it for the start up value. Steve, K6U
I am using version 12.27C. This has always worked, at least in versions before 12. However, in fooling around with WriteLog starting and stopping it I have discovered why it doesnt work for you: the