At 04:18 PM 1/22/00 -0500, you wrote:
>
>Hi All.....IMHO a better choice for conversion of the SB-200 to 6 is the
>3CX800. No screen voltage needed, HV ok for the tube.
>socket will mount in old tube hole...or mount on main chassis. Fill
>transformer is small.
>Am in the process of converting one now. de Norm N8RGR
>
Hello Norm,
I would agree, especally if it can be driven to full output with 10 watts
and I had the tubes already. The 4CX250B tubes have been sitting in
my desk draw for a number of years now waiting for me to tire of
my 200 watt brick.
Please provide additional information on your project as it develops. I
plan to post my effort to my website. There are lots of SB-200 amps
around cheap that would make great baselines for conversion to 6 meter
low drive units with a tube change.
/s/ Steve, N2CKH
http://www.QSL.net/n2ckh
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|