[AMPS] Wire size

Amps

[AMPS] Wire size

To:	<amps@contesting.com>
Subject:	[AMPS] Wire size
From:	dhutter@pacifier.com (Derek K7XD)
Date:	Wed, 2 Feb 2000 22:05:10 -0800

The National Electric Code would require #2 wire.


Derek


> I'm going to power a solid state amp with about 120 amps of 13vdc.  I'll need
> about 6-8 feet of wire to get from the PS to the amp.  What wire size should I
> use?
>
>


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[AMPS] Wire size, Vic Rosenthal [AMPS] Wire size, Phil T. (VA3UX) [AMPS] Wire size, Phil Clements [AMPS] Wire size, Larry Molitor [AMPS] Wire size, Derek K7XD <= [AMPS] Wire size, Vic Rosenthal [AMPS] Wire size, Alek Petkovic [AMPS] Wire size, Michael McCarthy, W1NR [AMPS] Wire size, Bruce R. Knox [AMPS] Wire size, Jeffrey A. Madore [AMPS] Wire size, Jim [AMPS] Wire size, Jeff Wolf

Previous by Date:	[AMPS] Wire size, Vic Rosenthal
Next by Date:	No subject, rb
Previous by Thread:	[AMPS] Wire size, Larry Molitor
Next by Thread:	[AMPS] Wire size, Vic Rosenthal
Indexes:	[Date] [Thread] [Top] [All Lists]