Amps
[Top] [All Lists]

[AMPS] Wire size

To: <amps@contesting.com>
Subject: [AMPS] Wire size
From: rakefet@rakefet.com (Vic Rosenthal)
Date: Wed, 02 Feb 2000 22:02:34 -0800
Derek K7XD wrote:
> 
> The National Electric Code would require #2 wire.

Yes, and the consensus of opinion is that the voltage drop with smaller wire
would be a bigger problem than heating.  For example, according to the table in
the ARRL handbook, 10 feet of #6 would drop almost half a volt.

73,
Vic, K2VCO
Fresno CA

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>