Amps
[Top] [All Lists]

[AMPS] SB-220: Operate/Standby Switch

To: <amps@contesting.com>
Subject: [AMPS] SB-220: Operate/Standby Switch
From: da_kang@hotmail.com (Jeff Wolf)
Date: Fri, 02 Feb 2001 19:06:37
>Hi Jeff,

>I'm sorry to correct you but gain and efficiency increase, although >this 
>is not the original point.



Mauri,

I do recognize the overall gain does increase, but the efficiency does not.

I draw less mains power to get 500 watts of output on my SB220 on CW 
position than I do on the higher SSB position, when I decrease drive.

Look at the Rp current in CW mode.  It is almost half what it is when in SSB 
position...  Mo watts wasted as heat does not equal less watts drawn from 
the mains power.


Toll Free



_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>