Subject: RE: [AMPS] Fan
>
> Xu, air flow volume is not based on voltage or current, but on
> cross-section, blade pitch and design, and rotational speed.
>
> Most all fans have a label indicating the manufacturer and model number;
> it's usually best to contact them for a full data sheet. Usually the sheet
> will include plots of air volume vs. back pressure, which is important to
> know when cooling an external anode tube.
Nicely done, Steve! Thanks for helping Xu out.
> "Each success only buys an admission ticket to a more difficult problem." --
> Henry Kissinger
" Each failure usually buys an admission ticket to a more expensive
solution."
Phil Clements
(((73)))
Phil, K5PC
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|