Amps
[Top] [All Lists]

[AMPS] Bypassing Screen of 4cx800a for 50 MHz

To: <amps@contesting.com>
Subject: [AMPS] Bypassing Screen of 4cx800a for 50 MHz
From: w9gt@home.com (W9GT)
Date: Thu, 13 Dec 2001 22:07:22 -0500
I was wondering the same thing about HF use of the 4CX800A.  Is it critical
to use the Svetlana socket with built-in screen bypass, or can you get by
using a "loctal" socket, which fits and a conventional bypass capacitor or
multiple capacitors?  I can see that this is a consideration for VHF, but I
wonder if it is critical up to 30 MHz.  Anyone tried it?

73,  Jack, W9GT
----- Original Message -----
From: "Frank Ayers" <w2fca@qsl.net>
To: "W6NQ" <w6nq@rfparts.com>; <amps@contesting.com>
Sent: Thursday, December 13, 2001 8:27 PM
Subject: Re: [AMPS] Bypassing Screen of 4cx800a for 50 MHz


>
> For what it's worth, I checked with Svetlana a while back about this and
> they told me that their socket made for the 4CX800 with the built-in
bypass
> was good to 150 MHz.
>
> Frank
> W2FCA
>
> ----------
> > From: W6NQ <w6nq@rfparts.com>
> > To: amps@contesting.com
> > Subject: [AMPS] Bypassing Screen of 4cx800a for 50 MHz
To: <amps@contesting.com>
> > Date: Friday, December 14, 2001 1:15
> >
> >
> > Has anyone had any experience with the Svetlana 4cx800A at 50 MHz?
> > How critical was method of screen bypass cap?
> > Thanks
> > Merit
> >
> >
> > --
> > FAQ on WWW:               http://www.contesting.com/FAQ/amps
> > Submissions:              amps@contesting.com
> > Administrative requests:  amps-REQUEST@contesting.com
> > Problems:                 owner-amps@contesting.com
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/amps
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>