Hi all,
Not quite related to amps exactly but I need a HV solution someone here might
be
able to help me with.
I need to check diode integrity of some microwave oven diodes. I'm trying to
build an
two electrostatic type filters & need a + & - HV supply. I'm going to get the
HV via a
neon transformer rated at 6.3kv @ 30ma. I've obtained two hv diodes from
microwaves put out to curb for pickup. The only device I have to check them is
a
Radio Shack digital multimeter cat # 22-812 & it will register a max of 1kv DC
& 750V
AC. I suspect the diodes are a string of diodes and aren't indicating anything
when I
test them with the ohm meter & "diode checking function" of the meter.
I would like to use this multi-meter to tell me if the diodes are intact and
would also
like to observe the voltage characteristics when this project is under load. I
don't
have a high voltage probe & am thinking that I might be able to get a decent
reading
if I use a resistor in series with the probe.
Might someone have a suggestion of what I can do from here to accomplish this?
Thanks
73,
Gary
KA1J
|