Amps Mailing List (date)
March 31, 2003
- [Amps] re: thunderbolt & valiant, Joe Giacobello, K2XX, 18:15
- [Amps] re: thunderbolt & valiant, Steve Katz, 17:46
- [Amps] re: thunderbolt & valiant, Ron Samchuk, 16:50
- [Amps] verniers for SB220, paule@sfu.ca, 16:09
- [Amps] Help needed on Firebird Swinger F100-4-BIL Amp, Rick Cole VK3YM, 15:28
- [Amps] Sell: Eimac YC-156, Phil Clements, 09:47
- [Amps] Svetlana 3cx800s?, Floyd Sense, 08:25
- [Amps] Capacitor checker, Dennis12Amplify@aol.com, 00:53
- [Amps] Filter cap for Henry 2k-3, Phil Clements, 00:16
March 30, 2003
- [Amps] Viewstar PT2500A, G. Clute, 23:21
- [Amps] Filter cap for Henry 2k-3, Dino Darling, 20:42
- [Amps] Capacitor checker, Conrad G0RUZ, 18:41
- [Amps] Analyse transmission lines - even on a Sony Playstation, Dr. David Kirkby, 18:34
- [Amps] Filter cap for Henry 2k-3, Bill Starks, 18:30
- Fw: [AMPS] injected SPAM, J. Leon Pringle, Jr and Audrey S. Pringle, 17:54
- [Amps] Capacitor checker, Phil Clements, 17:04
- [Amps] OK i understand, John T. M. Lyles, 16:41
- [Amps] injected SPAM, Mike Sawyer, 14:44
- [Amps] injected SPAM, Terry Gaiser, 14:44
- [Amps] Capacitor checker, Pete Smith, 13:58
- [Amps] injected SPAM, Vic Rosenthal, 13:43
- [Amps] Capacitor checker, Roger D. Johnson, 13:39
- [Amps] injected SPAM, k7rdx@earthlink.net, 13:32
- [Amps] injected SPAM, W0YR@aol.com, 13:17
- [Amps] Capacitor checker, Ed Stallman, 12:59
- [Amps] injected SPAM, John T. M. Lyles, 12:58
- [Amps] Capacitor checker, Mike McCarthy, W1NR, 09:32
- [Amps] Capacitor checker, Mike McCarthy, W1NR, 09:29
- [Amps] Capacitor checker, W0UN--John Brosnahan, 08:59
- [Amps] Capacitor checker, Ed Stallman, 08:11
March 29, 2003
- [Amps] (4) 813's, G. Clute, 17:53
- [Amps] Ameritron QSK-5PC replacement Fuse Lamps, Phil Clements, 15:31
- [Amps] Parts that may be of some use in amplifiers..., Radio WC6W, 14:34
- [Amps] Semiconductors that may be of some use in amplifiers..., Radio WC6W, 14:34
- [Amps] More parts that may be of some use..., Radio WC6W, 14:34
- [Amps] The National R-175A, Phil Clements, 14:22
- [Amps] Ameritron QSK-5PC replacement Fuse Lamps, Jim Reid, 14:20
- [Amps] Ameritron QSK-5PC replacement Fuse Lamps, nq5t@attbi.com, 13:51
- [Amps] TMC PAL-500, K6KWQ@aol.com, 11:19
- [Amps] The National R-175A, RFlabnotes@aol.com, 10:50
- [Amps] TMC PAL-500, Stuart & Allana Morehouse, 10:20
- [Amps] Filament Inrush Control, RFlabnotes@aol.com, 10:11
- [Amps] Re: Re: National R-175 Choke, W0YR@aol.com, 09:19
- [Amps] Re: Re: National R-175 Choke, Jan Erik Holm, 09:09
- [Amps] Re: National R-175 Choke, George & Marijke Guerin, 08:19
- [Amps] TenTec+Nichrome, Ian White, G3SEK, 07:58
- [Amps] Re: National R-175 Choke, 2, 05:39
- [Amps] Re: National R-175 Choke, Jan Erik Holm, 02:22
March 28, 2003
- [Amps] National R-175 Choke, Gary Schafer, 20:53
- [Amps] Filament Inrush Control, Steve Katz, 17:32
- [Amps] Filament Inrush Control, dj2001@mn.rr.com, 16:58
- [Amps] Filament Inrush Control, Phil Clements, 15:41
- [Amps] National R-175 Choke, W0YR@aol.com, 13:06
- [Amps] National R-175 Choke, RFlabnotes@aol.com, 12:43
- [Amps] TenTec+Nichrome, tongaloa, 12:19
- [Amps] TenTec+Nichrome, 2, 11:04
- Fwd: Re: [Amps] Filament Inrush Control, dj2001@mn.rr.com, 09:59
- [Amps] TenTec+Nichrome, tongaloa, 09:21
- [Amps] Filament Inrush Control, Ian White, G3SEK, 09:04
- [Amps] Filament Inrush Control, dj2001@mn.rr.com, 04:50
- [Amps] Parasites (parasitics), peter.chadwick@Zarlink.Com, 04:28
- [Amps] Parasites (parasitics), Ian White, G3SEK, 03:29
March 27, 2003
- [Amps] Parasites (parasitics), 2, 22:09
- [Amps] Fixed Vacuum Cap, 2, 22:09
- [Amps] Large Aerovox Capacitor, Doug Renwick, 21:12
- [Amps] Resonant Choke Filters, Gary Schafer, 21:06
- [Amps] Fixed Vacuum Cap, Dudley, 18:28
- [Amps] TenTec+Nichrome, 2, 18:23
- [Amps] Parasites (parasitics), 2, 18:22
- [Amps] FS: 6M amp for (2) 4-400 in Cleveland Heights, Ohio, Mark Foltarz, 18:22
- [Amps] TenTec+Nichrome, 2, 17:53
- [Amps] TenTec+Nichrome, Alek Petkovic, 17:36
- [Amps] TenTec+Nichrome, Alek Petkovic, 17:24
- [Amps] candles, Ian White, G3SEK, 16:50
- [Amps] Parasites (parasitics), Ian White, G3SEK, 16:42
- [Amps] TenTec+Nichrome, Billy Cox, 15:53
- [Amps] TenTec+Nichrome, tongaloa, 15:45
- [Amps] Parasites (parasitics), Merv Schweigert, 15:14
- [Amps] Parasites (parasitics), 2, 15:08
- [Amps] TenTec+Nichrome, 2, 15:07
- [Amps] Parasites (parasitics), Merv Schweigert, 14:54
- [Amps] TenTec+Nichrome, 2, 14:07
- [Amps] Parasites (parasitics), 2, 14:07
- [Amps] TenTec+Nichrome, 2, 14:06
- [Amps] TenTec+Nichrome, Bill Fuqua, 13:27
- [Amps] Resonant Choke Filters, RFlabnotes@aol.com, 13:23
- [Amps] candles, John T. M. Lyles, 12:54
- [Amps] TenTec+Nichrome, tongaloa, 12:41
- [Amps] TenTec+Nichrome, 2, 11:51
- [Amps] Parasites (parasitics), 2, 11:51
- [Amps] Parasites (parasitics), peter.chadwick@Zarlink.Com, 11:27
- [Amps] vac relay in Heathkit amp, John T. M. Lyles, 11:25
- [Amps] Parasites (parasitics), COLIN LAMB, 11:03
- [Amps] TenTec+Nichrome, qrp73@talk21.com, 10:48
- [Amps] smoking oscillations, John T. M. Lyles, 10:24
- [Amps] Parasites (parasitics), K6KWQ@aol.com, 10:16
- [Amps] Parasites (parasitics), 2, 10:13
- [Amps] Parasites (parasitics), 2, 10:13
- [Amps] Parasites (parasitics), Paul Christensen, Esq., 09:45
- [Amps] Parasites (parasitics), k7fm, 09:21
- [Amps] Parasites (parasitics), 2, 08:35
March 26, 2003
- [Amps] SB220 - qsk photos?, paule@sfu.ca, 23:49
- [Amps] Parasites (parasitics), Phil Clements, 23:35
- [Amps] Parasites (parasitics), 2, 22:49
- [Amps] Filament Inrush Control, 2, 22:24
- [Amps] Filament Inrush Control, Gary Schafer, 22:11
- [Amps] Replacement dummy load oil?, carl seyersdahl, 19:08
- [Amps] Parasites (parasitics), carl seyersdahl, 18:58
- [Amps] TUBES, carl seyersdahl, 18:32
- [Amps] Filament Inrush Control, dj2001@mn.rr.com, 18:20
- [Amps] Replacement dummy load oil?, K6KWQ@aol.com, 16:57
- [Amps] Replacement dummy load oil?, SteveM, 15:30
- [Amps] High Input Swr SB-220, 2, 14:52
- [Amps] SB200 tuned input, George & Marijke Guerin, 14:52
- [Amps] High Input Swr SB-220, Pete Smith, 12:50
- [Amps] Replacement dummy load oil?, Kim Elmore, 12:21
- [Amps] Replacement dummy load oil?, W0YR@aol.com, 11:52
- [Amps] Replacement dummy load oil?, Allen (Marty) Martin, 11:36
- [Amps] High Input Swr SB-220, Allen (Marty) Martin, 11:27
- [Amps] High Input Swr SB-220, Allen (Marty) Martin, 11:25
- [Amps] fil inrush, John T. M. Lyles, 10:16
- [Amps] SB200 tuned input, Ballew, Bruce N, 09:16
- [Amps] Filament Inrush Control, 2, 08:04
- [Amps] High Input Swr SB-220, 2, 07:50
- [Amps] Filament Inrush Control, Alek Petkovic, 07:07
- [Amps] Filament Inrush Control, peter.chadwick@Zarlink.Com, 04:54
- [Amps] Filament Inrush Control, Alek Petkovic, 04:22
- [Amps] Henry 2K-D, Michael Tope, 01:41
- [Amps] Henry 2K-D, Phil Clements, 00:59
- [Amps] Henry 2K-D, Michael Tope, 00:30
- [Amps] Filament Inrush Control, Phil Clements, 00:24
- [Amps] High Input Swr SB-220, Allen (Marty) Martin, 00:03
March 25, 2003
- [Amps] Hard-drive Dive, Gary Schafer, 22:10
- [Amps] Filament Inrush Control, 2, 21:23
- [Amps] Hard-drive Dive, 2, 21:18
- [Amps] Filament Inrush Control, Phil Clements, 21:07
- [Amps] Hard-drive Dive, Phil Clements, 20:45
- [Amps] Filament Inrush Control, 2, 20:14
- [Amps] Filament Inrush Control, RFlabnotes@aol.com, 20:05
- [Amps] Hard-drive Dive, Gary Schafer, 19:44
- [Amps] Test, kd4lyh@bellsouth.net, 19:26
- [Amps] Filament Inrush Control, Alek Petkovic, 17:52
- [Amps] HT power supplies?, gd0tep, 10:56
- [Amps] Hard-drive Dive, 2, 05:19
March 24, 2003
- [Amps] Hard-drive Dive, Gary Schafer, 23:19
- [Amps] 833A in linear for SSB, 2, 21:06
- [Amps] 833A in linear for SSB, 2, 20:41
- [Amps] Hard-drive Dive, k7rdx@earthlink.net, 19:29
- [Amps] HT power supplies?, Ian White, G3SEK, 14:49
- [Amps] WTB Transformer 2400-2700v 1amp, Partain, Chuck, 13:43
- [Amps] HT power supplies?, peter.chadwick@Zarlink.Com, 12:38
- [Amps] HT power supplies?, gd0tep, 11:21
- [Amps] Hard-drive Dive, Phil Clements, 11:19
- [Amps] Hard-drive Dive, 2, 10:27
- [Amps] Hard-drive Dive, Phil Clements, 09:06
- [Amps] 833A in linear for SSB, 2, 05:39
- [Amps] Hard-drive Dive, 2, 05:39
- [Amps] Re: COLLINS Engineering, peter.chadwick@Zarlink.Com, 04:59
- [Amps] RF-110A Help..., Traian, 02:44
March 23, 2003
- [Amps] RF-110A Help..., Phil Clements, 21:27
- [Amps] 833A in linear for SSB, Bill L. Fuqua, 18:36
- [Amps] RF-110A Help..., W0YR@aol.com, 17:37
- [Amps] RF-110A Help..., Don Lemley, 17:19
- [Amps] 833A in linear for SSB, Steven Grant W4IIV, 17:02
- [Amps] 833A in linear for SSB, JimMoci@aol.com, 14:30
- [Amps] Re: COLLINS Engineering, DF3KV@aol.com, 14:29
- [Amps] 833A in linear for SSB, 2, 14:28
- [Amps] Hard-drive Dive, Phil Clements, 14:27
- [Amps] 833A in linear for SSB, Jim Isbell, 13:32
- [Amps] Re: COLLINS Engineering, 2, 13:02
- [Amps] Re: COLLINS Engineering, Ian White, G3SEK, 12:42
- [Amps] Re: COLLINS Engineering, RFlabnotes@aol.com, 12:03
- [Amps] Hard-drive Dive, 2, 10:45
- [Amps] Pi-Network Values, Bob Maser, 10:28
- [Amps] Hard-drive Dive, Ian White, G3SEK, 10:00
- [Amps] B&W 850A Plate Tank, George & Marijke Guerin, 08:59
- [Amps] Hard-drive Dive, Bill Coleman N2BC, 08:54
- [Amps] Hard-drive Dive, Ian White, G3SEK, 07:52
- [Amps] Hard-drive Dive, 2, 05:30
March 22, 2003
- [Amps] Linear Amp, Jim Isbell, 23:18
- [Amps] Hard-drive Dive, Phil Clements, 21:12
- [Amps] FL2100 572B Failure Mode, 2, 19:58
- [Amps] FL2100 572B Failure Mode, Pat Barthelow, 19:15
- [Amps] Hard-drive Dive, Merv Schweigert, 19:00
- [Amps] Hard-drive Dive, k7fm, 17:12
- [Amps] Hard-drive Dive, 2, 17:08
- [Amps] Hard-drive Dive, k7fm, 16:54
- [Amps] Hard-drive Dive, dj2001@mn.rr.com, 16:31
- [Amps] Hard-drive Dive, 2, 15:59
- [Amps] Viewstar PT2500A Serial 2500 8406 040, G. Clute, 15:36
- [Amps] RE: Amps Digest, Vol 3, Issue 59, Dennis12Amplify@aol.com, 15:24
- [Amps] Dealing with the manure, Dennis12Amplify@aol.com, 14:53
- [Amps] Hard-drive Dive, k7fm, 11:47
- [Amps] SB220 Improvements, 2, 10:07
- [Amps] Hard-drive Dive, 2, 04:25
March 21, 2003
- [Amps] Hard-drive Dive, Merv Schweigert, 22:47
- [Amps] Hard-drive Dive, 2, 22:18
- [Amps] Hard-drive Dive, k7fm, 22:11
- [Amps] Current Limiting Filaments, 2, 21:44
- [Amps] Current Limiting Filaments, RFlabnotes@aol.com, 19:49
- [Amps] Problems with 3cx3000 amp, Phil Clements, 19:44
- [Amps] Problems with 3cx3000 amp, DF3KV@aol.com, 16:42
- [Amps] Problems with 3cx3000 amp, Vic Rosenthal, 15:39
- [Amps] Problems with 3cx3000 amp, Phil Clements, 14:57
- [Amps] Problems with 3cx3000 amp, 2, 14:52
- [Amps] Problems with 3cx3000 amp, Jimmy Jones, 14:09
- [Amps] RE: Amps Digest, Vol 3, Issue 81, Jimmy Jones, 13:23
- Fwd: Re: [Amps] Up thru the CB ranks, Bill Fuqua, 13:20
- [Amps] Up thru the CB ranks, Gary Schafer, 12:46
- [Amps] Up thru the CB ranks, Bill Fuqua, 10:53
- [Amps] TL922A and AL80A, 2, 07:07
- [Amps] Hard-drive Dive, 2, 06:32
- [Amps] FT-2100F, on4kj, 06:24
- [Amps] FT-2100F, Bob Maser, 01:24
March 20, 2003
- [Amps] Dealing with the manure, G. Clute, 23:51
- [Amps] an 807 amplifier project, skipp isaham, 22:58
- [Amps] Wanna Trade?, Bob Maser, 16:15
- [Amps] Glitch resistor?, Ian White, G3SEK, 15:26
- [Amps] Manure, who me?, Jeffrey Madore, 15:17
- [Amps] They're all Manure - Enough !, Administrator, 14:13
- [Amps] Dealing with the manure, Benny, 13:36
- [Amps] Glitch resistor?, gd0tep, 13:23
- [Amps] RE: Amps Digest, Vol 3, Issue 77, John von Gonten, 13:06
- [Amps] TL922A and AL80A, Steve Katz, 12:54
- [Amps] TL922A and AL80A, 2, 12:45
- [Amps] TL922A and AL80A, Steve Katz, 10:49
- [Amps] Dealing with the manure, SteveM, 10:37
- [Amps] Dealing with the manure, W0UN--John Brosnahan, 09:54
- [Amps] Dealing with the manure, W0UN--John Brosnahan, 09:53
- [Amps] gu-84b amp HF schematic, Partain, Chuck, 09:50
- [Amps] They're all Manure, TimNebo@aol.com, 09:05
- [Amps] TL922A and AL80A, Joe Isabella, 08:54
- [Amps] They're all Manure, W0YR@aol.com, 08:52
- [Amps] 10KW manufacturer, Martin Sole, 07:59
- [Amps] Dealing with the manure, Roger D. Johnson, 07:45
- [Amps] 10KW manufacturer, Blake M. Meinecke, 06:54
- [Amps] RE: Amps Digest, Vol 3, Issue 77, John von Gonten, 02:46
- [Amps] Dealing with the manure, skipp isaham, 02:36
- [Amps] TL922A and AL80A, Tom Rauch, 00:47
March 19, 2003
- [Amps] 10KW manufacturer, Martin Sole, 23:39
- [Amps] TL922A and AL80A, k7fm, 22:39
- [Amps] TL922A and AL80A, Michael Tope, 22:31
- Fwd: Re: [Amps] TL922A and AL80A, rlm, 21:46
- [Amps] TL922A and AL80A, rlm, 21:38
- [Amps] TL922A and AL80A, rlm, 21:35
- [Amps] TL922A and AL80A, Tom Rauch, 20:56
- [Amps] TL922A and AL80A, Tom Rauch, 20:45
- [Amps] TL922A and AL80A, Tom Rauch, 20:31
- [Amps] TL922A and AL80A, Georgens, Tom, 13:39
- [Amps] 5 KW Heath SB-220, Roger D. Johnson, 13:08
- [Amps] What!!, Rick Cole VK3YM, 12:39
- [Amps] 5 KW Heath SB-220, DF3KV@aol.com, 11:50
- [Amps] 5 KW Heath SB-220, Steve Katz, 11:06
- [Amps] TL922A and AL80A, Joe Isabella, 11:03
- [Amps] TL922A and AL80A, Michael Tope, 10:44
- [Amps] TL922A and AL80A, rlm, 10:32
- [Amps] 5 KW Heath SB-220, Bill Fuqua, 10:12
- [Amps] 5 KW Heath SB-220, K6KWQ@aol.com, 10:12
- [Amps] 5 KW Heath SB-220, Allen (Marty) Martin, 10:05
- [Amps] TL922A and AL80A, Joe Isabella, 09:50
- [Amps] 5 KW Heath SB-220, k7fm, 09:43
- [Amps] TL922A and AL80A, rlm, 07:41
- [Amps] TL922A and AL80A, rlm, 07:40
- [Amps] TL922A and AL80A, Tom Rauch, 04:49
- [Amps] TL922A and AL80A, Georgens, Tom, 00:55
March 18, 2003
- [Amps] 813 No parasitics, Mike Sawyer, 23:04
- [Amps] 813 No parasitics, Tom Rauch, 21:15
- [Amps] 813 No parasitics, Gary Schafer, 21:04
- [Amps] Silly idea?, rlm, 21:03
- [Amps] Re: Filament Current Limiting, rlm, 21:02
- [Amps] 813 No parasitics, rlm, 21:00
- [Amps] Silly idea?, Tom Rauch, 20:56
- [Amps] Re: Filament Current Limiting, Tom Rauch, 20:40
- [Amps] 813 No parasitics, Tom Rauch, 20:36
- [Amps] 813 No parasitics, Tom Rauch, 20:21
- [Amps] Silly idea?, Kim Elmore, 17:56
- [Amps] Info, on4kj, 17:53
- [Amps] 813 No parasitics, on4kj, 17:16
- [Amps] Silly idea?, k7fm, 16:17
- [Amps] Re: Filament Current Limiting, SteveM, 15:44
- [Amps] Silly idea?, rlm, 14:05
- [Amps] Re: Filament Current Limiting, RFlabnotes@aol.com, 13:39
- [Amps] HV connectors, Pat Barthelow, 13:31
- [Amps] WTB Millen H.V. connectors, tongaloa, 12:44
- [Amps] Tube chimneys wanted..., Gary Smith, 12:42
- [Amps] WTB Millen H.V. connectors, tongaloa, 12:13
- [Amps] Magnetic Shunts, Pat Barthelow, 11:33
- [Amps] Silly idea?, rlm, 11:04
- [Amps] Silly idea?, Bill Fuqua, 10:56
- [Amps] 813 No parasitics, rlm, 10:51
- [Amps] WTB Millen H.V. connectors, rlm, 10:36
- [Amps] WTB Millen H.V. connectors, Phil Clements, 10:31
- [Amps] Silly idea?, Wt8r@aol.com, 10:14
- [Amps] WTB Millen H.V. connectors, K6KWQ@aol.com, 10:09
- [Amps] Silly idea?, RFlabnotes@aol.com, 10:00
- [Amps] 813 No parasitics, Martin Sole, 09:36
- [Amps] Silly idea?, Ian White, G3SEK, 09:18
- [Amps] 813 No parasitics, rlm, 08:28
- [Amps] Silly idea?, rlm, 08:28
- [Amps] 813 No parasitics, rlm, 08:27
- [Amps] Re: Palomar, Roger D. Johnson, 07:17
- [Amps] Silly idea?, Tom Rauch, 06:16
- [Amps] 813 No parasitics, Tom Rauch, 06:08
- Fw: [Amps] 813 No parasitics, skipp isaham, 01:00
- [Amps] Re: Palomar, skipp isaham, 01:00
March 17, 2003
- [Amps] Silly idea?, SteveM, 23:08
- [Amps] Silly idea?, rlm, 23:00
- [Amps] 813 No parasitics, GGLL, 21:54
- [Amps] Silly idea?, Pete Smith, 21:32
- [Amps] Silly idea?, rlm, 20:45
- [Amps] Silly idea?, rlm, 20:45
- [Amps] Silly idea?, Tom Rauch, 20:01
- [Amps] Florida Hams...Check this out, Bob Maser, 19:58
- [Amps] SB-200 Question, rlm, 19:51
- [Amps] Membership, G. Clute, 19:34
- [Amps] Re: AC Circuit theory, Dave Haupt, 17:18
- [Amps] Silly idea?, Phil Clements, 16:50
- [Amps] Silly idea?, SteveM, 14:38
- [Amps] What!!!, Rick Cole VK3YM, 14:26
- [Amps] 813 No parasitics, Rick Cole VK3YM, 13:32
- [Amps] PSA2500 Power Supply, Harry Brown, 13:31
- [Amps] SB-200 Question, tongaloa, 12:57
- [Amps] Some Advice Needed, Ron Trepka, 12:45
- [Amps] PSA2500 Power Supply, tongaloa, 12:37
- [Amps] Silly idea?, Kim Elmore, 12:01
- [Amps] AC circuit analysis, RFlabnotes@aol.com, 11:53
- [Amps] PSA2500 Power Supply, Tom Rauch, 11:52
- [Amps] Need a Capacitor- help, Tom Rauch, 11:49
- Fw: [Amps] RE: Amps Digest, Vol 3, Issue 60, on4kj, 11:30
- [Amps] PSA2500 Power Supply, RFlabnotes@aol.com, 11:22
- [Amps] Some Advice Needed, Tom Rauch, 11:19
- [Amps] Need a Capacitor- help, Steve Katz, 11:15
- [Amps] Mailing list for parasitic osciallations., George K. Watson, 10:55
- [Amps] Tube chimneys wanted..., Jim's EBAY Account, 10:44
- [Amps] Mailing list for parasitic osciallations., rlm, 10:38
- [Amps] Some Advice Needed, rlm, 10:33
- [Amps] SB-200 Question, Doug Hall, 10:27
- [Amps] Mailing list for parasitic osciallations., dj2001@mn.rr.com, 10:15
- [Amps] Some Advice Needed, Mike Switzer, 10:12
- [Amps] Mailing list for parasitic osciallations., rlm, 10:11
- [Amps] SB-200 Question, rlm, 09:43
- [Amps] Mailing list for parasitic osciallations., Dr. David Kirkby, 09:25
- [Amps] FS many items, Bill Fuqua, 09:09
- [Amps] SB-200 Question, Samuel Ramac, 09:07
- [Amps] F.S. Russian tubes, shop of the tubes, 05:41
- [Amps] AC circuit analysis, rlm, 05:25
- [Amps] Need a Capacitor- help, Tom Rauch, 03:49
- [Amps] AC circuit analysis, Dave Haupt, 02:27
- [Amps] Need a Capacitor- help, Jeffrey Madore, 01:01
March 16, 2003
- [Amps] RE: Amps Digest, Vol 3, Issue 66, John von Gonten, 23:22
- [Amps] Up thru the CB ranks, Jeffrey Madore, 22:29
- [Amps] specific subject groups / mailing lists., rlm, 20:51
- [Amps] Mailing list for parasitic osciallations., rlm, 20:41
- [Amps] Membership, Bill L. Fuqua, 18:54
- [Amps] specific subject groups / mailing lists., skipp isaham, 18:49
- [Amps] Mailing list for parasitic osciallations., dj2001@mn.rr.com, 17:48
- [Amps] Gamma Match Capacitors, RFlabnotes@aol.com, 17:06
- [Amps] Mailing list for parasitic osciallations., Gary Schafer, 16:48
- [Amps] Membership, Gary Schafer, 16:42
- [Amps] EUREKA!!!!, TimNebo@aol.com, 15:10
- [Amps] Re: neon tranny & HV diodes, Gary Smith, 13:51
- [Amps] Accuracy of Ameritron forward power meter?, Floyd Sense, 13:13
- [Amps] EUREKA!!!!, Roger D. Johnson, 12:41
- [Amps] Accuracy of Ameritron forward power meter?, Tom Rauch, 11:30
- [Amps] Accuracy of Ameritron forward power meter?, Robert Carroll, 09:44
- [Amps] RE: Amps Digest, Vol 3, Issue 60, Pat Poirier, 09:38
- [Amps] Accuracy of Ameritron forward power meter?, Floyd Sense, 07:39
- [Amps] 1500w Solid State, Philip de Cadenet, 06:38
- [Amps] RE: Amps Digest, Vol 3, Issue 60, Ragnar Otterstad, 03:18
March 15, 2003
- [Amps] pi-net tanks, rlm, 21:15
- [Amps] RE: Amps Digest, Vol 3, Issue 60, Dan Fitch, 21:12
- [Amps] pi-net tanks, k7fm, 20:22
- [Amps] Re: neon tranny & HV diodes, BEAR, 19:40
- [Amps] RE: Amps Digest, Vol 3, Issue 60, Jimmy Jones, 19:08
- [Amps] Progress Report, Roger D. Johnson, 18:09
- [Amps] pi-net tanks, k7fm, 15:47
- [Amps] RE: Amps Digest, Vol 3, Issue 59, rlm, 13:47
- [Amps] pi-net tanks, rlm, 13:46
- [Amps] pi-net tanks, rlm, 13:45
- [Amps] pi-net tanks, Tom Rauch, 11:43
- [Amps] pi-net tanks, Vic Rosenthal, 11:41
- [Amps] pi-net tanks, rlm, 11:34
- [Amps] RE: Amps Digest, Vol 3, Issue 59, Bill Fuqua, 10:48
- [Amps] CB Amps, Roger D. Johnson, 10:42
- [Amps] Tuned Input for classic grounded grid with two 4-250's, WFVW, 10:22
- [Amps] CB Amps, Joe Isabella, 09:53
- [Amps] pi-net tanks, k7fm, 09:46
- [Amps] pi-net tanks, Tom Rauch, 09:11
- [Amps] pi-net tanks, rlm, 08:58
- [Amps] pi-net tanks, carl seyersdahl, 07:28
- [Amps] RE: Amps Digest, Vol 3, Issue 59, Alek Petkovic, 06:51
- [Amps] RE: Amps Digest, Vol 3, Issue 59, rlm, 06:02
- [Amps] On/Off switch for Heathkit HL-2200, Ragnar Otterstad, 05:10
March 14, 2003
- [Amps] New PINET Software, skipp isaham, 22:34
- [Amps] RE: Amps Digest, Vol 3, Issue 59, Arthur Moe, 21:02
- [Amps] RE: Amps Digest, Vol 3, Issue 59, Jimmy Jones, 20:10
- [Amps] CB Amps, G. Clute, 19:16
- [Amps] need to contact about web site, Tom Hix, 16:55
- [Amps] Membership, Bill Fuqua, 16:53
- [Amps] reading 8-10kv with a digital multimeter?, Ron Trepka, 16:30
- [Amps] Membership, Davis_R, 16:24
- [Amps] On/Off switch for Heathkit HL-2200, rlm, 16:15
- [Amps] Membership, Bill Fuqua, 15:43
- [Amps] None, Tom Hix, 14:44
- [Amps] On/Off switch for Heathkit HL-2200, Bob Green, 14:32
- [Amps] reading 8-10kv with a digital multimeter?, Radio WC6W, 14:12
- [Amps] Mailing list for parasitic osciallations., Patrick Riggins, 13:52
- [Amps] Membership, rlm, 12:52
- [Amps] reading 8-10kv with a digital multimeter?, Steve Katz, 12:45
- [Amps] Mailing list for parasitic osciallations., rlm, 12:43
- [Amps] reading 8-10kv with a digital multimeter?, COLIN LAMB, 12:24
- [Amps] test hv diodes, John T. M. Lyles, 12:20
- [Amps] Membership, Roger D. Johnson, 12:15
- [Amps] Mailing list for parasitic osciallations., rlm, 12:13
- [Amps] Mailing list for parasitic osciallations., Dr. David Kirkby, 11:24
- [Amps] reading 8-10kv with a digital multimeter?, Steve Katz, 11:24
- [Amps] reading 8-10kv with a digital multimeter?, Gary Smith, 10:54
- [Amps] Mailing list for parasitic osciallations., Dr. David Kirkby, 09:59
- [Amps] GS-35B 33cm ampilifer, Bill Fuqua, 09:13
- [Amps] Speaking of Palomar, TimNebo@aol.com, 09:07
- [Amps] CB amps and Palomar, skipp isaham, 00:02
March 13, 2003
- [Amps] Speaking of Palomar, rlm, 19:49
- [Amps] LK500ZB advice, rlm, 19:49
- [Amps] Mailing list for parasitic osciallations., rlm, 19:42
- [Amps] A question about SB-200/SB-201, rlm, 19:42
- [Amps] A question about SB-200/SB-201, Vic Rosenthal, 16:13
- [Amps] LK500ZB advice, Bill Fuqua, 15:44
- [Amps] A question about SB-200/SB-201, Bob Green, 15:42
- [Amps] LK500ZB advice, Tom Rauch, 14:06
- [Amps] CB Amps, Steve Cloutier, 978-597-3311, 14:04
- [Amps] Speaking of Palomar, Tom Rauch, 13:49
- [Amps] 3KV switching power supply, Radio WC6W, 13:47
- [Amps] Speaking of Palomar, Vic Rosenthal, 12:50
- [Amps] 3KV switching power supply, RFlabnotes@aol.com, 12:24
- [Amps] 6 Meter Amp with two 4CX800A/GU74B's, Al n7ioh, 12:22
- [Amps] Speaking of Palomar, RFlabnotes@aol.com, 11:56
- [Amps] Speaking of Palomar, Roger D. Johnson, 11:50
- [Amps] 3KV switching power supply, Jeff Weinberg W8CQ, 11:33
- [Amps] 3KV switching power supply, Pete Smith, 11:29
- [Amps] LK500ZB advice, Steve Katz, 11:26
- [Amps] Speaking of Palomar, Steve Katz, 11:22
- [Amps] Mailing list for parasitic osciallations., Ian White, G3SEK, 11:20
- [Amps] Re: CB Amps, Floyd Sense, 11:19
- [Amps] 3KV switching power supply, Jeff Weinberg W8CQ, 11:14
- [Amps] CB Amps, Steve Katz, 11:13
- [Amps] LK500ZB advice, rlm, 11:10
- [Amps] 3KV switching power supply, Doug Hall, 10:53
- [Amps] Speaking of Palomar, Steve Katz, 10:52
- [Amps] LK500ZB advice, Doug Hall, 10:47
- [Amps] Re: CB Amps, N8WNB@aol.com, 10:43
- [Amps] re: supplier of gu-84b tube?, NI4L, 10:33
- [Amps] CB Amps, Joe Isabella, 10:22
- [Amps] Mailing list for parasitic osciallations., rlm, 10:19
- [Amps] Speaking of Palomar, TimNebo@aol.com, 10:12
- [Amps] Mailing list for parasitic osciallations., rlm, 10:09
- [Amps] CB Amps, rlm, 10:08
- [Amps] Mailing list for parasitic osciallations., Gary Schafer, 10:07
- [Amps] CB Amps, John, 10:05
- [Amps] supplier of gu-84b tube?, George K. Watson, 09:47
- [Amps] CB Amps, Roger D. Johnson, 09:44
- [Amps] supplier of gu-84b tube?, Partain, Chuck, 09:08
- [Amps] RE: Amps Digest, Vol 3, Issue 53, Jimmy Jones, 08:44
- [Amps] Mailing list for parasitic osciallations., Steven Grant W4IIV, 08:25
- [Amps] CB Amps, Tom Rauch, 07:46
- [Amps] CB Amps, Steve Cloutier, 978-597-3311, 07:19
- [Amps] CB Amps, rlm, 06:49
- [Amps] CB Amps, Tom Rauch, 05:55
- [Amps] CB Amps, Roger D. Johnson, 04:44
- [Amps] CB Amps, kenw2dtc, 04:24
- [Amps] CB Amps, Roger D. Johnson, 03:03
- [Amps] Mailing list for parasitic osciallations., Patrick Riggins, 00:20
March 12, 2003
- [Amps] Mailing list for parasitic osciallations., rlm, 20:39
- [Amps] Parasitic Oscillations in RF Amplifiers, rlm, 20:23
- [Amps] Mailing list for parasitic osciallations., Dr. David Kirkby, 20:06
- [Amps] Relay derating with frequency?, Tom Rauch, 18:27
- [Amps] 12AU7's, carl seyersdahl, 18:27
- [Amps] Speaking of Palomar, Tom Rauch, 18:14
- [Amps] Speaking of Palomar, Tom Rauch, 18:01
- [Amps] Parasitic Oscillations in RF Amplifiers, ATanner283@aol.com, 18:00
- [Amps] Parasitic Oscillations in RF Amplifiers, Tom Rauch, 17:54
- [Amps] Speaking of Palomar, Jay Musikar, 16:44
- [Amps] Relay derating with frequency?, Bill Smith, 13:10
- [Amps] Found 8874, now need chimney, Doug Hall, 12:55
- [Amps] Found 8874, now need chimney, W0UN--John Brosnahan, 12:17
- [Amps] Found 8874, now need chimney, rlm, 11:58
- [Amps] Speaking of Palomar, Roger D. Johnson, 11:50
- [Amps] Speaking of Palomar, Roger D. Johnson, 11:35
- [Amps] Speaking of Palomar, Steve Katz, 11:31
- [Amps] Found 8874, now need chimney, Steve Katz, 11:25
- [Amps] Speaking of Palomar, Vic Rosenthal, 11:15
- [Amps] Found 8874, now need chimney, Doug Hall, 11:11
- [Amps] FS sockets for 3CX800A7, 8072,8122 and 8874 tubes, Bill Fuqua, 11:03
- [Amps] Parasitic Oscillations in RF Amplifiers, on4kj, 10:54
- [Amps] Speaking of Palomar, N8WNB@aol.com, 10:22
- [Amps] Parasitic Oscillations in RF Amplifiers, k7fm, 09:38
- [Amps] Parasitic Oscillations in RF Amplifiers, rlm, 09:17
- [Amps] AL-80B questions, dj2001@mn.rr.com, 05:43
- [Amps] Parasitic Oscillations in RF Amplifiers, Tom Rauch, 05:33
- [Amps] Palomar, Tom Rauch, 05:15
March 11, 2003
- Fw: [Amps] Palomar, skipp isaham, 23:31
- [Amps] Parasitic Oscillations in RF Amplifiers, k7fm, 22:52
- [Amps] Palomar, Larry Kayser, 21:00
- [Amps] AL-80B questions, kenw2dtc, 20:49
- [Amps] Re: What would a meaningful test look like?, Tom Rauch, 20:10
- [Amps] Palomar, Roger D. Johnson, 19:36
- [Amps] AL-80B questions, dj2001@mn.rr.com, 18:40
- [Amps] AL-80B questions, Wt8r@aol.com, 18:10
- [Amps] AL-80B questions, rlm, 16:51
- [Amps] AL-80B questions, on4kj, 16:32
- [Amps] AL-80B questions, rlm, 16:17
- [Amps] Looking for Buss Maxi-Fuse Holder.., Keith LaBorde - K4KAL, 15:56
- [Amps] Re: Amps Digest, Vol 3, Issue 49, rlm, 15:55
- [Amps] AL-80B questions, Tom Rauch, 14:48
- [Amps] AL-80B questions, rlm, 13:03
- [Amps] Re: Amps Digest, Vol 3, Issue 49, W1GOR, 12:41
- [Amps] Public Apology, RFlabnotes@aol.com, 11:21
- [Amps] OK that does it, Merv Schweigert, 10:51
- [Amps] Looking for an 8874, Jeff Maass, 10:03
- [Amps] AL-80B questions, RFlabnotes@aol.com, 10:01
- [Amps] Looking for an 8874, Doug Hall, 09:48
- [Amps] OK that does it, Will, 07:29
- [Amps] OK that does it, rlm, 04:59
- [Amps] OK that does it, Dave Haupt, 01:10
March 10, 2003
- [Amps] Tuned Input, Peter Frenning, OZ1PIF, 16:23
- [Amps] AL-80B questions, rlm, 16:10
- [Amps] AL-80B questions, rlm, 16:10
- [Amps] SB-1000 Transformer & Problem, Jeff Weinberg W8CQ, 14:43
- [Amps] SB-1000 Transformer & Problem, Tom Rauch, 14:41
- [Amps] AL-80B questions, Tom Rauch, 14:30
- [Amps] SB-1000 Transformer & Problem, Phil - KB9CRY, 14:26
- [Amps] AL-80B questions, Tom Rauch, 14:22
- [Amps] AL-80B questions, rlm, 13:41
- [Amps] 3-500zg tubes, rlm, 13:41
- [Amps] Tuned Input, rlm, 12:41
- [Amps] AL-80B questions, Michael Tope, 11:44
- [Amps] Tuned Input, Davis_R, 11:41
- [Amps] --> Reminder: When Posting a REPLY, BEAR, 11:35
- [Amps] 3-500zg tubes, Merv Schweigert, 11:07
- [Amps] Tuned Input, rlm, 10:48
- [Amps] AL-80B questions, rlm, 10:38
- [Amps] Tuned Input, Davis_R, 10:09
- [Amps] New PINET Software, RFlabnotes@aol.com, 09:12
- [Amps] AL-80B questions, RFlabnotes@aol.com, 08:29
- [Amps] Transformer and Inductor theory, RFlabnotes@aol.com, 08:03
- [Amps] AL-80B questions, rlm, 07:08
- [Amps] 3-500zg tubes, rlm, 07:08
- [Amps] RE: Parasitics, rlm, 07:07
- [Amps] AL-80B questions, Tom Rauch, 06:13
- [Amps] RE: Parasitics, Jimmy Jones, 03:34
- [Amps] re: MLA 2500, Dudley Hurry, 01:03
- [Amps] re: MLA 2500, Ron Samchuk, 00:22
- [Amps] wtb 3PDT relay, G. Clute, 00:06
March 09, 2003
- [Amps] Test, Jeffrey Madore, 22:35
- [Amps] 3-500zg tubes, Merv Schweigert, 21:41
- [Amps] Transformer and Inductor theory, rlm, 21:31
- [Amps] AL-80B questions, rlm, 21:23
- [Amps] Transformer and Inductor theory, RFlabnotes@aol.com, 21:06
- [Amps] AL-80B questions, Tom Rauch, 19:52
- [Amps] Tuned Input, Tom Rauch, 19:16
- [Amps] AL-80B questions, rlm, 19:11
- [Amps] SB-220 cap arc and the local broadcast station, rlm, 19:11
- [Amps] AL-80B questions, rlm, 19:11
- [Amps] Tuned Input, rlm, 19:10
- [Amps] Clipperton Bandswitch wafer, Tom Rauch, 19:04
- [Amps] AL-80B questions, Ian White, G3SEK, 18:20
- [Amps] Tuned Input, Ed, 17:51
- [Amps] AL-80B questions, Tom Rauch, 16:26
- [Amps] Ameritron alternative, Ragnar Otterstad, 16:06
- [Amps] SB-220 cap arc and the local broadcast station, Tom Rauch, 15:58
- [Amps] SB-220 cap arc and the local broadcast station, Tom Rauch, 15:55
- [Amps] Nichrome magic, rlm, 15:31
- [Amps] AL-80B questions, rlm, 15:30
- [Amps] A WAR STORY!, rlm, 15:30
- [Amps] AL-80B questions, rlm, 15:30
- [Amps] Ameritron AL-80B - Alternative?, rlm, 15:30
- [Amps] Clipperton Bandswitch wafer, mst, 15:29
- [Amps] FL2100z help needed, Osten B Magnusson, 15:24
- [Amps] 3-500zg tubes, Tom Hix, 15:08
- [Amps] AL-80B questions, dj2001@mn.rr.com, 14:29
- [Amps] AL-80B questions, rlm, 14:18
- [Amps] AL-80B questions, rlm, 14:02
- [Amps] A WAR STORY!, k7fm, 13:55
- [Amps] AL-80B questions, Ian White, G3SEK, 13:41
- [Amps] AL-80B questions, Joe Isabella, 13:38
- [Amps] SB-220 cap arc and the local broadcast station, Pete Smith, 12:59
- [Amps] SB-220 cap arc and the local broadcast station, skipp isaham, 12:25
- [Amps] Ameritron AL-80B - Alternative?, k7fm, 12:20
- [Amps] Nichrome magic, Tom Rauch, 12:05
- [Amps] FL2100z help needed, Nermin Bajramoviæ, 12:03
- [Amps] AL-80B questions, dj2001@mn.rr.com, 12:02
- [Amps] AL-80B questions, Tom Rauch, 11:53
- [Amps] AL-80B questions, Tom Rauch, 11:45
- [Amps] AL-80B questions, rlm, 11:44
- [Amps] AL-80B questions, rlm, 11:44
- [Amps] FL2100z help needed, Osten B Magnusson, 11:21
- [Amps] Ameritron AL-80B - Alternative?, rlm, 11:08
- [Amps] AL-80B questions, rlm, 10:41
- [Amps] AL-80B questions, rlm, 10:40
- [Amps] AL-80B questions, rlm, 10:40
- [Amps] Ameritron AL-80B - Alternative?, Rod Elliott, 09:40
- [Amps] AL-80B questions, Pete Smith, 09:06
- [Amps] AL-80B questions, Tom and Linda Hellem, 08:53
- [Amps] AL-80B questions, dj2001@mn.rr.com, 07:32
- [Amps] AL-80B questions, Tom Rauch, 07:20
- [Amps] AL-80B questions, dj2001@mn.rr.com, 06:22
- [Amps] Nichrome magic, Tom Rauch, 06:03
- [Amps] AL-80B questions, Tom Rauch, 05:58
- [Amps] AL-80B questions, dj2001@mn.rr.com, 05:39
- [Amps] Ameritron AL-80B - Alternative?, Tom Rauch, 05:35
- [Amps] AL-80B questions, Michael Tope, 03:43
- [Amps] Ameritron AL-80B - Alternative?, Vic Rosenthal, 01:19
- [Amps] Ameritron AL-80B - Alternative?, rlm, 00:23
- [Amps] AL-80B questions, ad5gb, 00:16
March 08, 2003
- [Amps] wtb 3PDT relay, NI4L, 22:32
- [Amps] SUMMARY of RESPONSES: 4CX1600B vs. GU84B, Jeff Maass, 21:30
- [Amps] FT101ZD ALC Circuit, Firson Maryutenli, 20:52
- [Amps] Ameritron AL-80B - Alternative?, Rod Elliott, 17:17
- [Amps] sockets for 3CX800A7 , 8072,8122 and 8874 tubes, Bill L. Fuqua, 16:52
- [Amps] FS: 600 WATT SOLID STATE PA UNITS, Norman Hockler, 15:03
- [Amps] Icom PW1 CI-V commands, OM7ZZ, 14:28
- [Amps] FS: 600 WATT SOLID STATE PA UNITS, Phil Clements, 14:25
- [Amps] Re: Fused Plugs, K6KWQ@aol.com, 14:18
- [Amps] input ckt. board, carl seyersdahl, 12:47
- [Amps] FS: 600 WATT SOLID STATE PA UNITS, Norman Hockler, 12:26
- [Amps] Arcing, GGLL, 11:45
- [Amps] 4CX1600 vs GU-84B, NI4L, 11:04
- [Amps] FS Sockets for 3CX800A7 , 8072 ,8122 and 8874, Bill L. Fuqua, 10:49
- [Amps] B&W LPA-1, Eric Lowell, 10:38
- [Amps] Arcing, on4kj, 10:25
- [Amps] 4CX1600B vs. GU84B, W2fca@cs.com, 09:59
- [Amps] 4CX1600B vs. GU84B, Tom Rauch, 09:06
- [Amps] B & W Amp, k7fm, 08:53
- [Amps] 4CX1600B vs. GU84B, Ian White, G3SEK, 08:53
- [Amps] B&W LPA-1, john, 08:15
- [Amps] Why hasn't solid state replaced tubes?, rlm, 08:05
- [Amps] Arcing, rlm, 07:46
- [Amps] Arcing, rlm, 07:29
- [Amps] 4CX1600B vs. GU84B, Jeff Maass, 07:13
- [Amps] Arcing, Tom Rauch, 07:13
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 07:07
- [Amps] Arcing, dj2001@mn.rr.com, 06:58
- [Amps] Why hasn't solid state replaced tubes?, Ian White, G3SEK, 06:37
- [Amps] Arcing, rlm, 06:20
March 07, 2003
- [Amps] New question, Jeffrey Madore, 22:48
- [Amps] alt 4cx250b amp, skipp isaham, 22:47
- [Amps] Why hasn't solid state replaced tubes?, Gary Schafer, 19:53
- [Amps] Arcing, Radio WC6W, 19:33
- [Amps] Why hasn't solid state replaced tubes?, Gary Schafer, 19:29
- [Amps] Believe it or not... re: REPEATER RANGE CALCULATOR, Gary Schafer, 19:14
- [Amps] Arcing, rlm, 18:08
- [Amps] re: Arcos & Unknown 2m 2x4cx250b designs, kenw2dtc, 16:48
- [Amps] Alpha 77 meter lamp replacement, K8MLM@aol.com, 16:45
- [Amps] Arcing, gdaught6@stanford.edu, 14:25
- [Amps] Why hasn't solid state replaced tubes?, Gary Schafer, 13:29
- [Amps] Alpha 86, Ian White, G3SEK, 13:25
- [Amps] Arcing, rlm, 13:15
- [Amps] Arcing, Jim Reid, 13:10
- [Amps] Why hasn't solid state replaced tubes?, Ian White, G3SEK, 13:09
- [Amps] Arcing, Tom Rauch, 13:08
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 12:52
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 12:52
- [Amps] Arcing, Radio WC6W, 12:20
- [Amps] Arcing, Jeffrey Madore, 11:35
- [Amps] Why hasn't solid state replaced tubes?, Gary Schafer, 11:25
- [Amps] Alpha 77 meter lamp replacement, Mike McCarthy, W1NR, 11:13
- [Amps] Rejuvenating glass power tubes, rlm, 09:44
- [Amps] Arcing, rlm, 09:42
- [Amps] Why hasn't solid state replaced tubes?, Bill Fuqua, 09:19
- [Amps] Rejuvenating glass power tubes, W0YR@aol.com, 07:29
- [Amps] Arcing, Davis_R, 06:55
- [Amps] Why hasn't solid state replaced tubes?, Ian White, G3SEK, 06:55
- [Amps] Arcing, Tom Rauch, 06:33
- [Amps] Why hasn't solid state replaced tubes?, peter.chadwick@Zarlink.Com, 05:20
- [Amps] Arcing, rlm, 05:14
- [Amps] Rejuvenating glass power tubes, rlm, 05:14
- [Amps] re: Arcos & Unknown 2m 2x4cx250b designs, Ian White, G3SEK, 04:15
- [Amps] Why hasn't solid state replaced tubes?, rlm, 04:05
- [Amps] Believe it or not... re: REPEATER RANGE CALCULATOR, Karl-Arne Markström, 01:14
- [Amps] Believe it or not... re: REPEATER RANGE CALCULATOR, skipp isaham, 00:25
- [Amps] re: Arcos & Unknown 2m 2x4cx250b designs, skipp isaham, 00:08
March 06, 2003
- [Amps] Arcing, Radio WC6W, 23:19
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 22:30
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 22:15
- [Amps] Use of Manual T/R Switches, Phil Clements, 21:57
- Fwd: Re: [Amps] Why hasn't solid state replaced tubes?, Bill Fuqua, 20:55
- [Amps] Why hasn't solid state replaced tubes?, Bill Fuqua, 20:30
- [Amps] Rejuvenating glass power tubes, Paul B. Peters, VE7AVV, 20:22
- [Amps] Why hasn't solid state replaced tubes?, Gary Schafer, 19:54
- [Amps] Why hasn't solid state replaced tubes?, Gary Schafer, 19:06
- [Amps] Use of Manual T/R Switches, GGLL, 18:53
- [Amps] Use of Manual T/R Switches, Bill Fuqua, 18:38
- [Amps] Why hasn't solid state replaced tubes?, Zyg Skrobanski, 17:12
- [Amps] Use of Manual T/R Switches, Mike Sawyer, 17:08
- [Amps] Use of Manual T/R Switches, W0YR@aol.com, 17:06
- [Amps] Use of Manual T/R Switches, Merv Schweigert, 16:37
- [Amps] Why hasn't solid state replaced tubes?, Zyg Skrobanski, 16:31
- [Amps] Use of Manual T/R Switches, Pete Smith, 16:31
- [Amps] Use of Manual T/R Switches, Don Havlicek, 16:20
- [Amps] Use of Manual T/R Switches, Bill Fuqua, 16:15
- [Amps] Use of Manual T/R Switches, Pete Smith, 15:32
- [Amps] Arcing, rlm, 13:42
- [Amps] Use of Manual T/R Switches, dj2001@mn.rr.com, 12:05
- [Amps] Use of Manual T/R Switches, Steve Katz, 10:58
- [Amps] Electronic Relay Use In RF Aplications, Vic Rosenthal, 10:29
- [Amps] Use of Manual T/R Switches, Tom Rauch, 10:26
- Fwd: Re: [Amps] MRF150 based 1500 watt amp design/cost, Bill Fuqua, 10:26
- [Amps] Unknown 2m 2x4cx250b design?, Dfmich@aol.com, 10:15
- [Amps] Arcing, Tom Rauch, 10:10
- [Amps] Use of Manual T/R Switches, k7fm, 09:15
- [Amps] MRF150 based 1500 watt amp design/cost, jeff millar, 08:45
- [Amps] Re: IM Distortion, RFlabnotes@aol.com, 08:25
- [Amps] MRF150 based 1500 watt amp design/cost, Phil Clements, 07:54
- [Amps] Alpha 86, rlm, 07:29
- [Amps] Use of Manual T/R Switches, rlm, 07:27
- [Amps] Alpha 86, rlm, 07:19
- [Amps] Alpha 86, rlm, 07:13
- [Amps] Use of Manual T/R Switches, W0YR@aol.com, 07:10
- [Amps] MRF150 based 1500 watt amp design/cost, w2fca@cs.com, 07:07
- [Amps] Alpha 86, rlm, 07:04
- [Amps] Electronic Relay Use In RF Aplications, Rick Cole VK3YM, 06:52
- [Amps] Alpha 86, rlm, 06:25
- [Amps] Alpha 86, rlm, 06:23
- [Amps] MRF150 based 1500 watt amp design/cost, Tom Rauch, 06:15
- [Amps] Alpha 86, dj2001@mn.rr.com, 06:13
- [Amps] Alpha 86, Tom Rauch, 06:02
- [Amps] Alpha 86, Tom Rauch, 05:49
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 05:46
- [Amps] Alpha 86, Tom Rauch, 05:39
- [Amps] Alpha 86, Tom Rauch, 05:37
- [Amps] Alpha 86, Alek Petkovic, 04:29
- [Amps] Unknown 2m 2x4cx250b design?, kenw2dtc, 03:49
- [Amps] MRF150 based 1500 watt amp design/cost, Pete Smith, 03:47
- [Amps] Unknown 2m 2x4cx250b design?, Einar Persson, 03:05
- [Amps] Why hasn't solid state replaced tubes?, Ian White, G3SEK, 01:41
- [Amps] Electronic Relay Use In RF Applications, Bill L. Fuqua, 00:18
March 05, 2003
- [Amps] MRF150 based 1500 watt amp design/cost, Billy Cox, 23:48
- [Amps] MRF150 based 1500 watt amp design/cost, Phil Clements, 22:10
- [Amps] Alpha 86, Phil Clements, 22:02
- [Amps] Electronic Relay Use In RF Applications, Doug Hall, 22:00
- [Amps] MRF150 based 1500 watt amp design/cost, Zyg Skrobanski, 21:41
- [Amps] Electronic Relay Use In RF Applications, Rick Cole VK3YM, 21:07
- [Amps] Tone Selection 2 tone, 3 Tone, Pat Barthelow, 20:57
- [Amps] Alpha 86, Gary Schafer, 20:57
- [Amps] MRF150 based 1500 watt amp design/cost, Bill L. Fuqua, 20:25
- [Amps] Alpha 86, G. Clute, 19:56
- [Amps] Alpha 86, rlm, 19:29
- [Amps] tube life, william kessinger, 19:26
- [Amps] MRF150 based 1500 watt amp design/cost, Dan Levin, 19:00
- [Amps] Alpha 86, carl seyersdahl, 18:38
- [Amps] Alpha 86, dj2001@mn.rr.com, 18:36
- [Amps] Alpha 86, Vic Rosenthal, 18:35
- [Amps] Alpha 86, Vic Rosenthal, 18:32
- [Amps] Alpha 86, Steve Katz, 18:09
- [Amps] Alpha 86, Alek Petkovic, 17:25
- [Amps] Why hasn't solid state replaced tubes?, Zyg Skrobanski, 17:13
- [Amps] Alpha 86, dj2001@mn.rr.com, 16:47
- [Amps] Why hasn't solid state replaced tubes?, Gary Schafer, 16:07
- [Amps] Re: IM Distortion, Ian White, G3SEK, 16:02
- [Amps] Henry 3k classic X MkII, Phil Clements, 16:01
- [Amps] Metron "Magnus" MA1000B, Henry SS-750, Henry SS-1200, Phil Clements, 15:51
- [Amps] Alpha 86, Vic Rosenthal, 15:49
- [Amps] Alpha 86, Phil Clements, 15:31
- [Amps] Why hasn't solid state replaced tubes?, Gary Schafer, 15:26
- [Amps] Alpha 86, Tom Rauch, 14:06
- [Amps] IM Distortion, Tom Rauch, 13:44
- [Amps] Alpha 86, W0UN--John Brosnahan, 13:36
- [Amps] Why hasn't solid state replaced tubes?, Doug Hall, 13:17
- [Amps] Re: IM Distortion, RFlabnotes@aol.com, 13:15
- [Amps] Alpha 86, rlm, 12:43
- [Amps] Silver Plated Copper strap, rlm, 12:37
- [Amps] unsuscribe, daski@mindspring.com, 12:29
- [Amps] Why hasn't solid state replaced tubes?, rlm, 12:27
- [Amps] IM Distortion, rlm, 12:27
- [Amps] Silver Plated Copper strap, Tom Rauch, 12:11
- [Amps] Alpha 86, Vic Rosenthal, 12:09
- [Amps] Silver Plated Copper strap, rlm, 11:57
- [Amps] New question, Steve Katz, 11:57
- Fwd: [Amps] Why hasn't solid state replaced tubes?, RFlabnotes@aol.com, 11:39
- [Amps] Why hasn't solid state replaced tubes?, WYsixK, 11:35
- [Amps] Re: IM Distortion, Ian White, G3SEK, 11:29
- [Amps] Silver Plated Copper strap, Dudley, 11:27
- [Amps] un subscrbe, smug14bn, 11:24
- [Amps] IM Distortion, Tom Rauch, 11:22
- [Amps] Why hasn't solid state replaced tubes?, Vic Rosenthal, 11:21
- [Amps] IM Distortion, rlm, 11:16
- [Amps] Alpha 99, Tom Rauch, 10:43
- [Amps] High Energy Corp. Web Site (HEC Capacitors), Bill Smith, 10:36
- [Amps] IM Distortion, Tom Rauch, 10:31
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 10:26
- [Amps] Alpha 99, Keith LaBorde - K4KAL, 10:23
- [Amps] IM Distortion, RFlabnotes@aol.com, 10:15
- [Amps] Why hasn't solid state replaced tubes?, Doug Hall, 10:07
- [Amps] Why hasn't solid state replaced tubes?, dj2001@mn.rr.com, 10:02
- [Amps] Why hasn't solid state replaced tubes?, w2fca@cs.com, 09:32
- [Amps] Alpha 99, Tom Rauch, 09:31
- [Amps] Solid State Amps: 1500 watts is cheap if . . ., Steve Cloutier, 978-597-3311, 09:00
- [Amps] Why hasn't solid state replaced tubes?, Ian White, G3SEK, 08:42
- [Amps] Why hasn't solid state replaced tubes?, Ian White, G3SEK, 08:42
- [Amps] Alpha 99, Keith LaBorde - K4KAL, 08:33
- [Amps] Why hasn't solid state replaced tubes?, rlm, 07:48
- [Amps] Henry 3k classic X MkII, rlm, 07:38
- [Amps] Why hasn't solid state replaced tubes?, rlm, 07:30
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 07:30
- [Amps] Why hasn't solid state replaced tubes?, dj2001@mn.rr.com, 06:41
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 05:51
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 05:38
- [Amps] Why hasn't solid state replaced tubes?, dj2001@mn.rr.com, 05:34
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 05:29
- [Amps] Henry 3k classic X MkII, Rich Borgioli, 04:55
- [Amps] Why hasn't solid state replaced tubes?, Ian White, G3SEK, 03:54
- [Amps] Why hasn't solid state replaced tubes?, Michael Tope, 02:13
- [Amps] Fw: Henry Radio Ebay Store, skipp isaham, 01:50
- [Amps] Metron "Magnus" MA1000B and Alpha 78 Manuals available onsonic, skipp isaham, 01:47
- [Amps] New question, Jeffrey Madore, 00:57
- [Amps] Alpha 99, Gary D Elliott, 00:50
March 04, 2003
- [Amps] Why hasn't solid state replaced tubes?, Gary Schafer, 22:37
- [Amps] 8877s, ETO and the General Electric Contract, Bert Almemo, 22:32
- [Amps] T400012208 rectifier try here for parts, n9iww2@verizon.net, 22:11
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 21:53
- [Amps] T400012208 rectifier, GGLL, 21:35
- [Amps] Re: Elecraft K-2 Design presentations, Tom Rauch, 21:30
- [Amps] Why hasn't solid state replaced tubes?, rlm, 21:26
- [Amps] Some of us are new to amplifiers, rlm, 21:26
- [Amps] 8877s, ETO and the General Electric Contract, rlm, 21:26
- [Amps] Mistakes, rlm, 21:26
- [Amps] Why hasn't solid state replaced tubes?, Zyg Skrobanski, 21:10
- [Amps] T400012208 rectifier, Dan Evans, 20:43
- [Amps] 8877s, ETO and the General Electric Contract, Gary Schafer, 19:59
- [Amps] Elecraft K-2 Design presentations, Blake M. Meinecke, 19:42
- [Amps] Elecraft K-2 Design presentations, Pat Barthelow, 19:01
- [Amps] Just acquired nice Intermod Test Fixture, Pat Barthelow, 18:56
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 18:08
- [Amps] Why hasn't solid state replaced tubes?, Merv Schweigert, 17:56
- [Amps] Why hasn't solid state replaced tubes?, Zyg Skrobanski, 17:14
- [Amps] 10 KW solid state link, on4kj, 16:26
- [Amps] 8877s, ETO and the General Electric Contract, on4kj, 15:44
- [Amps] Some of us are new to amplifiers, Patrick Hoppe, 15:42
- [Amps] Mistakes, david DODDS, 15:39
- [Amps] 8877s, ETO and the General Electric Contract, rlm, 15:17
- [Amps] Mistakes, rlm, 15:17
- [Amps] Why hasn't solid state replaced tubes?, rlm, 15:17
- Fwd: Re: [Amps] 8877s, ETO and the General Electric Contract, rlm, 15:17
- [Amps] 8877s, ETO and the General Electric Contract, dj2001@mn.rr.com, 15:06
- [Amps] Why hasn't solid state replaced tubes?, Doug Hall, 14:56
- [Amps] 8877s, ETO and the General Electric Contract, Tom Rauch, 14:33
- [Amps] Mistakes, Phil Clements, 14:26
- [Amps] 8877s, ETO and the General Electric Contract, rlm, 13:49
- [Amps] Mistakes, Ian White, G3SEK, 13:40
- [Amps] 8877s, ETO and the General Electric Contract, Bert Almemo, 12:49
- [Amps] Why hasn't solid state replaced tubes?, Radio WC6W, 12:40
- [Amps] Mistakes, Ian White, G3SEK, 12:38
- [Amps] Why hasn't solid state replaced tubes?, Ian White, G3SEK, 12:38
- [Amps] Solidstate amps, Radio WC6W, 12:28
- [Amps] Why hasn't solid state replaced tubes?, Radio WC6W, 12:28
- [Amps] info on the GE MRI contract settled, John T. M. Lyles, 12:23
- Fwd: Re: [Amps] 8877s, ETO and the General Electric Contract, dj2001@mn.rr.com, 11:49
- [Amps] IM big amps, w2fca@cs.com, 11:48
- [Amps] 8877s, ETO and the General Electric Contract, rlm, 10:57
- [Amps] 8877s, ETO and the General Electric Contract, rlm, 10:56
- [Amps] Solid State Amps: 1500 watts is cheap if . . ., George K. Watson, 10:27
- [Amps] IM big amps, RFlabnotes@aol.com, 10:00
- [Amps] IM big amps, Tom Rauch, 09:20
- [Amps] Solid State Amps: 1500 watts is cheap if . . ., RFlabnotes@aol.com, 09:19
- [Amps] Why hasn't solid state replaced tubes?, peter.chadwick@Zarlink.Com, 09:13
- [Amps] Why hasn't solid state replaced tubes?, Zyg Skrobanski, 09:05
- [Amps] 8877s, ETO and the General Electric Contract, Tom Rauch, 09:02
- [Amps] 8877s, ETO and the General Electric Contract, MorgusMagnificen@aol.com, 08:57
- [Amps] 8877s, ETO and the General Electric Contract, rlm, 08:45
- [Amps] IM big amps, w2fca@cs.com, 08:18
- [Amps] 8877s, ETO and the General Electric Contract, rlm, 08:15
- [Amps] Why hasn't solid state replaced tubes?, peter.chadwick@Zarlink.Com, 07:49
- [Amps] 8877s, ETO and the General Electric Contract, RFlabnotes@aol.com, 07:36
- [Amps] Why hasn't solid state replaced tubes?, Zyg Skrobanski, 07:32
- [Amps] Radio shack power meter info, Martin Sole, 06:40
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 05:41
- [Amps] 8877s, ETO and the General Electric Contract, Tom Rauch, 05:36
- [Amps] 8877 failures and GE Medical, peter.chadwick@Zarlink.Com, 03:49
- [Amps] Solid State Amps: 1500 watts is cheap if . . ., Steve Cloutier, 978-597-3311, 01:19
- [Amps] 8877s, ETO and the General Electric Contract, Dave Haupt, 00:29
- [Amps] Oh S**t - Sorry about that, Dan Levin, 00:16
March 03, 2003
- [Amps] Solid State Amps: How About Open Source?, Dan Levin, 23:36
- [Amps] 10 KW solid state link, craig, 23:11
- [Amps] IM big amps, craig, 22:14
- [Amps] Why hasn't solid state replaced tubes?, Zyg Skrobanski, 20:59
- [Amps] Fwd: IM and big amps, RFlabnotes@aol.com, 20:11
- [Amps] Why hasn't solid state replaced tubes?, Zyg Skrobanski, 19:58
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 18:46
- [Amps] Solidstate amps, Conrad G0RUZ, 18:45
- [Amps] AL-80B questions, 2, 18:35
- [Amps] AL-80B questions, Conrad G0RUZ, 18:13
- [Amps] Why hasn't solid state replaced tubes?, wb8jkr@juno.com, 15:42
- [Amps] Why hasn't solid state replaced tubes?, Zyg Skrobanski, 15:20
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 15:13
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 15:10
- [Amps] Why hasn't solid state replaced tubes?, Zyg Skrobanski, 15:06
- [Amps] Tank Circuit (was toroid) model, Tom Rauch, 14:57
- [Amps] Solidstate amps, Jeffrey Madore, 14:29
- [Amps] hear hear about the toobs, 2, 14:25
- [Amps] Toroidal Tank Coils, 2, 14:24
- [Amps] Toroidal Tank Coils, 2, 14:19
- [Amps] Why hasn't solid state replaced tubes?, Keith LaBorde - K4KAL, 13:34
- [Amps] Toroidal Tank Coils, Tom Rauch, 13:09
- [Amps] Toroidal Tank Coils, Jeffrey Madore, 12:42
- [Amps] Why hasn't solid state replaced tubes?, TimNebo@aol.com, 12:38
- [Amps] Why hasn't solid state replaced tubes?, Radio WC6W, 12:35
- [Amps] Toroidal Tank Coils, Tom Rauch, 12:30
- [Amps] Why hasn't solid state replaced tubes?, Tom Rauch, 12:22
- [Amps] hear hear about the toobs, Tom Rauch, 12:20
- [Amps] Toroidal Tank Coils, Bill Fuqua, 11:12
- [Amps] Why hasn't solid state replaced tubes?, Pete Smith, 11:04
- [Amps] Toroidal Tank Coils, Tom Rauch, 10:42
- [Amps] hear hear about the toobs, Tom Rauch, 10:15
- [Amps] hear hear about the toobs, Keith LaBorde - K4KAL, 10:12
- [Amps] AL-80B questions, 2, 10:05
- [Amps] Toroidal Tank Coils, 2, 10:05
- [Amps] hear hear about the toobs, John T. M. Lyles, 09:51
- [Amps] Toroidal Tank Coils, Tom Rauch, 07:49
- [Amps] AL-80B questions, 2, 06:50
- [Amps] AL-80B questions, 2, 06:50
- [Amps] AL-80B questions, Tom Rauch, 06:07
- [Amps] Re: THANKS re the 8877 failures and GE Medical, 2, 05:03
- [Amps] AL-80B questions, Skram, Helge (MED), 04:51
- Fw: [Amps] Re: THANKS re the 8877 failures and GE Medical, on4kj, 03:15
- [Amps] Toroidal Tank Coils, Radio WC6W, 00:23
March 02, 2003
- [Amps] 8877 for sale, Bob Maser, 22:10
- [Amps] AL-80B questions, Wt8r@aol.com, 21:55
- [Amps] Amps Reflector, 2, 20:03
- [Amps] Re: THANKS re the 8877 failures and GE Medical, Tom Rauch, 20:01
- [Amps] THANKS re the 8877 failures and GE Medical, W0UN--John Brosnahan, 19:35
- [Amps] 8877 failures and GE Medical, 2, 19:30
- [Amps] 8877 failures and GE Medical, Tom Rauch, 19:06
- [Amps] AL-80B questions, on4kj, 17:50
- [Amps] Amps Reflector, k7fm, 17:01
- [Amps] AL-80B questions, 2, 16:50
- [Amps] AL-80B questions, on4kj, 16:04
- [Amps] Amps Reflector, GGLL, 14:33
- [Amps] (no subject), MorgusMagnificen@aol.com, 13:42
- [Amps] AL-80B questions, 2, 12:46
- [Amps] Amps Reflector, J. Leon Pringle, Jr and Audrey S. Pringle, 12:43
- [Amps] AL-80B questions, Tom Rauch, 12:28
- [Amps] AL-80B questions, Conrad G0RUZ, 12:05
- [Amps] bending filaments (was al80B), Tom Rauch, 11:54
- [Amps] AL-80B questions, 2, 09:49
- [Amps] AL-80B questions, Tom Rauch, 08:33
- [Amps] AL-80B questions, 2, 07:39
- [Amps] AL-80B questions, 2, 07:39
- [Amps] AL-80B questions, Tom Rauch, 06:48
- [Amps] AL-80B questions, ad5gb, 00:18
March 01, 2003
- [Amps] 30l-1 Relay Source, 2, 18:39
- [Amps] 30l-1 Relay Source, Pat Barthelow, 17:29
- [Amps] 30l-1, Richard Brown, 17:05
- [Amps] FS:10 meter kit for AmpSupply LK-500, JimMoci@aol.com, 13:47
- [Amps] Stainless Steel, Tom Rauch, 13:37
- [Amps] YC-156 Max Ep, ARNE GJERNING, 13:15
- [Amps] Stainless Steel, 2, 11:39
- [Amps] Stainless Steel, MorgusMagnificen@aol.com, 10:33
- [Amps] YC156 bias voltage, 2, 10:21
- [Amps] Stainless, 2, 10:19
- [Amps] YC156 bias voltage, Norman Hockler, 09:22
- [Amps] Radio Switch Model 86S, Bill Smith, 08:49
- [Amps] Johnson Air Variable Capacitor #154-16, Bill Smith, 08:43
- [Amps] Stainless, Tom Rauch, 07:26
- [Amps] YC156 bias voltage, kd4lyh@bellsouth.net, 01:11