AC relays buzz + arc their contacts in step-start service. However when
operated on DC of a lower potential, they work fine. Typical DC
potential pull-in is 20 - 30 v for a 115vac relay coil.
> Regarding the step start. Is there anything wrong with using a 115 vac
>relay?
>
>Dale K9VUJ
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
- R. L. Measures, a.k.a. Rich..., 805.386.3734, AG6K,
www.vcnet.com/measures.
end
|