[Amps] Filament Inrush Control

To:	<amps@contesting.com>
Subject:	[Amps] Filament Inrush Control
From:	garyschafer at attbi.com (Gary Schafer)
Date:	Wed Mar 26 22:11:30 2003

I use one in a power supply I built. Works fine. Get a big buzz on the 
armature as it is engaging though.

73
Gary  K4FMX


dj2001@mn.rr.com wrote:
>  Regarding the step start.  Is there anything wrong with using a 115 vac 
> relay?
> 
> Dale K9VUJ
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] Filament Inrush Control, Alek Petkovic [Amps] Filament Inrush Control, RFlabnotes@aol.com [Amps] Filament Inrush Control, 2 [Amps] Filament Inrush Control, Phil Clements [Amps] Filament Inrush Control, 2 [Amps] Filament Inrush Control, Phil Clements [Amps] Filament Inrush Control, Alek Petkovic [Amps] Filament Inrush Control, peter.chadwick@Zarlink.Com [Amps] Filament Inrush Control, Alek Petkovic [Amps] Filament Inrush Control, dj2001@mn.rr.com [Amps] Filament Inrush Control, Gary Schafer <= Message not available Message not available [Amps] Filament Inrush Control, dj2001@mn.rr.com [Amps] Filament Inrush Control, Ian White, G3SEK [Amps] Filament Inrush Control, Phil Clements [Amps] Filament Inrush Control, dj2001@mn.rr.com [Amps] Filament Inrush Control, 2 [Amps] Filament Inrush Control, 2 Fwd: Re: [Amps] Filament Inrush Control, dj2001@mn.rr.com [Amps] Filament Inrush Control, Steve Katz [Amps] Filament Inrush Control, RFlabnotes@aol.com

Previous by Date:	[Amps] Replacement dummy load oil?, carl seyersdahl
Next by Date:	[Amps] Filament Inrush Control, 2
Previous by Thread:	[Amps] Filament Inrush Control, dj2001@mn.rr.com
Next by Thread:	[Amps] Filament Inrush Control, dj2001@mn.rr.com
Indexes:	[Date] [Thread] [Top] [All Lists]