I have some NEW 124.0311.100 11 Pin Johnson sockets for 3CX800A7 , 8072 ,8122
and 8874 tubes. I will sell them for $19 each plus $6 for postage for any
quantity. Compare this to $40 or more that commercial vendors want. First
email first served until I run out. These are getting hard to find and I lucked
out and found a small quantity of them.
73
Bill wa4lav
-----Original Message-----
From: skipp isaham <nospam4me@juno.com>
To: amps@contesting.com
To: <amps@contesting.com>
Date: Fri, 7 Mar 2003 19:45:59 -0800
Subject: [Amps] alt 4cx250b amp
One other thought would be to compare the project amp
to the socket less 4cx250 amp by the European Ham
published in one of the amateur mags at least a
decade or more past. Might be a spin off or hybrid of
that project.
cheers
skipp
-
--------- Forwarded message ----------
From: "Ian White, G3SEK" <G3SEK@ifwtech.co.uk>
-
SM3MXR wrote:
>
> Hi all
> I have a half built 2m 2x4cx250 project on the bench.
> It is a strip line type, like the ARCOS 2x4cx250 amplifier I've been
-
> Is there anyone on this list who knows if this
>is a known/published design?
-
I've tried to find out about as many 4CX250 VHF amp designs as
possible... but this is a new one.
--
73 from Ian G3SEK 'In Practice' columnist for RadCom (RSGB)
Editor, 'The VHF/UHF DX Book'
________________________________________________________________
Sign Up for Juno Platinum Internet Access Today
Only $9.95 per month!
Visit www.juno.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|