Just want to say thanks for all the responses. Certainly looks like
Harris is a big favourite, unfortunately they are the competition in
this case.
I would specifically like to thank the mention of Palomar as a possible
source. After thoroughly researching their credentials, Ebay, I will
suggest we commision them to produce a suitable system, this comprising
a modified 40 channel mobile radio, probably called president Bush,
aren't all CB's named president something or other, this will be teamed
with the 10 KW PA named the 'Gulf Blaster 10000', and comprising several
zilliion 2N2222's in parallel. I'm sure the client (government of a
nation where tea and coffee are as strong as it gets) will be highly
impressed. :-)
Enough, back to the serious stuff. I'm off to Brazil next week to sort
out some more big amp problems, Hope I don't run into any Palomar's!
73's
Martin de HS0ZED
-----Original Message-----
From: Tom Rauch [mailto:w8ji@contesting.com]
Sent: 20 March 2003 19:31
To: Martin Sole
Subject: Re: [Amps] 10KW manufacturer
Thanks. I don't have anything solid state.
----- Original Message -----
From: "Martin Sole" <msole@loxinfo.co.th>
To: "'Tom Rauch'" <w8ji@contesting.com>
Sent: Thursday, March 20, 2003 1:10 AM
Subject: RE: [Amps] 10KW manufacturer
> Hi Tom,
>
> The end user is a government (friendly) in SE Asia, contract award
> will most likely be in Singapore. As far as I know the intended use is
> as part of a shore based search and rescue system. The clients RFP
> states broadband 2-30MHz as a requirement and solid state as a
> preference. We believe, but are not sure, that the competition will
> include the Harris RF-1155A and so are looking for something that can
> comptete effectively against that. My part in this is somewhat minimal
> consultancy at the moment. From what else I know the radio part of the
> system will most likely need to do ISB as well as all the other usual
> modes.
>
> Regards
> Martin
>
>
> -----Original Message-----
> From: Tom Rauch [mailto:w8ji@contesting.com]
> Sent: 20 March 2003 12:49
> To: Martin Sole
> Subject: Re: [Amps] 10KW manufacturer
>
>
> Who is the customer and what is the use Martin?
>
> I manufacture large HF PA's for ISM applications. You can see some
> being assembled at www.w8ji.com under "my work".
>
> ----- Original Message -----
> From: "Martin Sole" <msole@loxinfo.co.th>
> To: "'AMPS'" <amps@contesting.com>
> Sent: Wednesday, March 19, 2003 11:39 PM
> Subject: [Amps] 10KW manufacturer
>
>
> > For a commercial project I have a client requesting a 10KW HF radio
> > system. Who manufactures an amplifier/integrated system at this
power
> > level commercially. Looking for something that is a series
production
> > item, no one off specials. Most of the stuff I can find is either 1
or
>
> > 5 KW max.
> >
> > Thanks
> > Martin
> >
> >
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> >
>
>
|