OK guys I made the subject soft start , but that about the only thing
right this time. The resistor should be big enough , 50ohms 100w. It
all worked one part at a time but when I hooked it all up together my 60
main power relay chatters , I am going to rewire and not run the coil
supply for the 60 amp through all the relays. I have the 120- control
voltage daisy changed the coils and I think I am getting VD. That aint
good.
I am able to adjust the delay as required from .15 sec to 180 with the
Dayton relays so ignore my original statement about 10sec delay on HV, I
will adjust it.
More when I know more.
Rich , kd0zz
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|