Amps
[Top] [All Lists]

Re: [Amps] Power cord to use when converting AL-80B to 240 volts?

To: John Vickers <wa4tt@nlamerica.com>, amps@contesting.com
Subject: Re: [Amps] Power cord to use when converting AL-80B to 240 volts?
From: Joe Isabella <n3ji@yahoo.com>
Date: Mon, 3 Oct 2005 03:30:05 -0700 (PDT)
List-post: <mailto:amps@contesting.com>
Fire those good old rigs up!!  I'm listening right now to a couple guys on 3885 
with 30dB over S9 sigs on 3885 AM (5:20am, CDT).  AM is not dead on the Amateur 
Bands!!  It's a lot of fun.
 
To tie this in with the subject, I'm running a Henry 3K-A in CW, SSB, and AM on 
a 3 wire 240V 30A circuit I ran myself.  It is spec'ed as requiring 230VAC, 2 
or 3 wire @ 30A.
 
Joe, N3JI


John Vickers <wa4tt@nlamerica.com> wrote:
----- Original Message ----- 
From: "Will Matney" 
>
> Well no! About every amp now is made for AM/SSB use unless.............

Will, Didn't make myself clear. I wasn't refering to linear use on AM, some 
fellows down in N. Fla are producing class C finals and modulators for the 
cb crowd. Custom made for their driver of choice.

I still have several AM rigs here, but seldom use them anymore. My favorite 
is a single 450TH with 810 modulators. The 450TH's would be a good subject 
for the gassy tube thread ! Out of 4, only one left that isn't bad gassy. 
(they're over 60 yrs old)
73 WA4TT 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

                
---------------------------------
Yahoo! for Good
 Click here to donate to the Hurricane Katrina relief effort. 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>