I am considering building a dual 4CX1500B amplifier for a nice clean 1500W
of AB2 output. Since one tube is only rated for 1100W output in AB2, the
need for two to reach full "leagal" limit. Since I already have the
components available, other tubes are not being considered. The discusion
of the Harris 110 amp brought this back to mind.
Someday I would also like to build a 2x 4-1000, mostly for looks. I have
enough components for that project also, including a filament transformer
designed for a 2 tube setup.
But, I feel that 3 or more tubes pushes the complication factor past the
benefit. One of my elmers way back in the 70's built an HF amp using 4x
4CX250's. But he had a large box full of tubes and sockets to choose from.
It was a handfull to keep running correctly and never really worked well on
10M.
If I could afford the power lighting the filaments of a 4CX10000, I'd love a
class A amp using one of those!
Mike, W1NR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|