Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Amps] IM distortion and such

from [Tom W8JI] [Permanent Link][Original]
To: <craxd1@verizon.net>, <amps@contesting.com>
Subject: Re: [Amps] IM distortion and such
From: "Tom W8JI" <w8ji@w8ji.com>
Date: Tue, 27 Jun 2006 05:46:22 -0400
List-post: <mailto:amps@contesting.com> 
> They can be used on up in current, say for pulse circuits 
> and RF heating. The 400 mA is the maximum plate current at 
> single tone for minimum distortion. That's for 600 watts 
> PEP useful power each. That's listed in the tables on page 
> 2 or 3 under a class B RF amp.

Will,

Where did you get the idea 400mA is a "minimum distortion" 
condition?

73 Tom





_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] AL-80B questions, Steve Thompson
Next by Date:  Re: [Amps] Amps Digest, Vol 42, Issue 67, Tom W8JI
Previous by Thread:  Re: [Amps] IM distortion and such, Will Matney
Next by Thread:  Re: [Amps] IM distortion and such, Will Matney
Indexes:  [Date] [Thread] [Top] [All Lists]