Hello,
Planning on using a single power supply for two GS35-B
amplifiers. Only one amp. will control the HV power supply. This
amp. has a three minute delay from the time the filament applied
before the HV can be turned on. The other amp. will have a three
minute delay from the time its filament is turned on before the PTT
can be used to key the amp.
Question: Do you have to wait three minutes from the time the
filament voltage is turned on until the HV is applied?
73,
Mike, K4GMH
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|