Amps
[Top] [All Lists]

Re: [Amps] An inexpensive choke for a resonant filter

To: amps@contesting.com
Subject: Re: [Amps] An inexpensive choke for a resonant filter
From: Steve Thompson <g8gsq@eltac.co.uk>
Date: Wed, 16 May 2007 17:31:40 +0100
List-post: <mailto:amps@contesting.com>


Vic K2VCO wrote:

> Angel Vilaseca wrote:
>
>
>> I wonder if a HV transformer from a microwave oven cold be recycled 
>> in a HV power supply, using its secondary winding a a choke. It's big 
>> and it's free!
>
>
>
> I have one of these and it looks like one side of the secondary is 
> designed to be grounded. So the insulation may be poor at this point. 
> If this is the case with yours, you might think about using it in the 
> negative side of the power supply.

I have three here I'm experimenting with (as HV supplies). I lifted the
grounded end of the secondary on all of them - two hipot to 8kV+, the
third arcs at 3kV but a piece of Kapton tape on the frame under where
the wire comes out of the bobbin takes it beyond 8kV too.

Steve
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>