ATF! Now there's an idea. I'd often wondered what was best for this job. I
think the main parameter is that it's not synthetic.
I have to use non-synthetic oil for a couple of classic cars that have paper
gaskets and synth or semi synth would pour straight through them.
So how about finding a classic car parts and service shop? Maybe they could
help? What do old Harleys use?
Also, how about EP80 gear oil? I think that's "old spec". Modern EP90 is
different, and I can't use that in the 1958 Land Rover because it apparently
attacks the bronze bearings. Maybe that's fully mineral oil?
cheers
Dave G0OIL
--- On Fri, 5/12/08, Charles Bibb <zedkay@telepak.net> wrote:
From: Charles Bibb <zedkay@telepak.net>
Subject: Re: [Amps] Non Detergent motor oil for dummy loads?????
To: "Lloyd Korb" <k8dio@windstream.net>, amps@contesting.com
Date: Friday, 5 December, 2008, 7:37 PM
At 01:16 PM 12/5/2008, Lloyd Korb wrote:
>I am resurrecting an old Heath Cantenna and having a hard time finding
>mineral oil in large quantities. I have heard that is okay to use non
>detergent motor oil. Is there any truth to that?
I bought a commercial 2500W load from a broadcast engineer. It was
filled with automotive transmission fluid (red). Been working fine
for over a year now. ;-)
73,
Charles - K5ZK
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|