The existing units are about 0.25 inches (maybe 0.3125) on center from the
tube envelope.
I am not sure how hot the tube envelope gets offhand but it can't be that
good for the resistor.
I bought the amp probably about 1984 so heat fatigue is probably the cause
(too many
contests I guess). There is about 2 inches center to center vertically
between the suppressors
so anything added will have to be in the vertical plane. Trying to get new
parts in will be
interesting for the bottom units.
Thanks all.
73, Larry W6NWS
----- Original Message -----
From: "Carl" <km1h@jeremy.mv.com>
To: "Larry" <w6nws@arrl.net>; "Amps" <amps@contesting.com>
Sent: Friday, March 12, 2010 5:57 PM
Subject: Re: [Amps] Clipperton-L parasitic suppressors
> No offense Alek but the masses on here dont believe in voodo science as
> they do on the forum you just arrived from. You might want to search the
> archives on the subject.
>
> Larry, for a real suppressor that works get a Xicon 50 Ohm 5W MOX resistor
> and a pair of 100pf 500V silver micas for each suppressor from Mouser.
>
> Lay a resistor and the original (or a clone) in parallel. Connect a cap
> between them at both ends. Wire it dead bug or on perf board.
>
> Carl
> KM1H
>
>
> ----- Original Message -----
> From: "Alek Petkovic" <vk6apk@bigpond.com>
> To: "Larry" <w6nws@arrl.net>; "Amps" <amps@contesting.com>
> Sent: Friday, March 12, 2010 4:57 PM
> Subject: Re: [Amps] Clipperton-L parasitic suppressors
>
>
>> G'day Larry,
>>
>> At the risk of offending the masses, don't worry what value they are.
>> Just go to http://www.somis.org and scroll down to
>> <http://www.somis.org/Price-Info.html>Price List--Information Sheet
>> and order yourself a kit for 4x572B. Much simpler and much better.
>>
>> If you still wanna know the value of the original, they are as you
>> said. In the circuit they are R6 and R7 and the parts list quotes
>> them as being 100 Ohm, 2 Watts.
>>
>> Cheers, Alek
>> VK6APK
>>
>> At 05:33 AM 13/03/2010, Larry wrote:
>>>I have cleverly filed my Clipperton-L doc. I am hoping someone can
>>>help. The parasitic
>>>suppressor resistors have broken. I believe they are 100 ohm 2W
>>>composition. Can
>>>anyone confirm the value? I am not sure what caused the breakage at
>>>this point.
>>>
>>>73, Larry W6NWS
>>>_______________________________________________
>>>Amps mailing list
>>>Amps@contesting.com
>>>http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>> http://www.qrz.com/db/vk6apk
>> http://www.qrz.com/db/vk6py
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|