Thanks to everyone that was kind enough to answer my question (curiosity?)
regarding the SA1388 diode packages "discovered" in my junk box.
On Wed, Mar 31, 2010 at 4:19 PM, Mike <k4gmh@arrl.net> wrote:
> Does anyone know what a Semtech "Slimpac" SA1388 rectifier is good for?
> Seems too big for a small signal diode, yet may not be big enough for power
> supply use. The case is ~2" long and 0.300" wide and has a schematic diode
> showing the anode/cathode ends. Also, the number "6824" is printed on the
> case following the diode schematic. Don't have a high pot tester to find
> out the breakdown voltage.
>
> Came across six of the diodes in my "junk box" while looking for another
> component. Curiosity got the best of me. Didn't find anything through a
> "Google" search. So, hopefully, someone on the Reflector has some info. on
> whether the SA1388 could be useful or just taking up space in the junk box.
>
>
> --
> 73,
> Mike, K4GMH
>
--
73,
Mike, K4GMH
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|