Amps
[Top] [All Lists]

Re: [Amps] PS ideas for solid state amps

To: mtnest@hartcom.net, amps@contesting.com
Subject: Re: [Amps] PS ideas for solid state amps
From: TexasRF@aol.com
Date: Mon, 11 Oct 2010 09:56:28 EDT
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Ebay usually has several listed for reasonable prices.
 
73,
Gerald K5GW
 
 
 
 
In a message dated 10/11/2010 8:34:18 A.M. Central Daylight Time,  
mtnest@hartcom.net writes:



To the group..........

When considering power  supplies for Moderate power HF Amp's (+- 300-400W 
output), in class AB,  requiring about 28V @ 30A, what are most guys using? 

I would assume a  switching supply to be the preferred design - yes/no, 
especially considering  shipping costs ? 


1) Homebrew - if so, are there any complete and  working switching supply 
designs on the internet?

2) Surplus - any  companies which sell these switching supply animals?

3) Without  breaking the bank, any new switching supplies to recommend



Any  other ideas .....like " In the long run it would be less expensive to 
just buy  a commercial amp/ps and be done with it."


Thanks for any  comments,

Tom
W4TMW
_______________________________________________
Amps  mailing  list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>