Amps
[Top] [All Lists]

Re: [Amps] switching mosfet rf amp - choice, schematic, and layout

To: <dansawyer@earthlink.net>
Subject: Re: [Amps] switching mosfet rf amp - choice, schematic, and layout
From: "Baruch Zilbershatz" <4z4rb@bezeqint.net>
Date: Fri, 21 Jan 2011 07:04:16 +0200
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Google dl9ah and look at his work

4z4rb 
Baruch Zilbershatz 
Nitzanay-Oz 118 
Nitzanay -Oz 
42836
ISRAEL 
phone: (+)972-052 8753838

-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Dan Sawyer
Sent: Friday, January 21, 2011 6:57 AM
To: Amps
Subject: [Amps] switching mosfet rf amp - choice, schematic, and layout

All,

I apologize for this request, it may be a bit like 'what is your 
favourite food'. It is not meant to be that wide open, here goes:

I am interested in experimenting with fast switching mosfets with the 
goal of building a legal limit mosfet linear. It would be perfectible if 
there were a couple of steps in this process. Is there a good source of 
high efficiency mosfet designs? I am interested in the principals and 
perhaps board layout.

Thanks in advance, Dan


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>