[Amps] Ten Tec Titan 425 Fuses Blew

["Mark Robinson" <markrob@mindspring.com>]

Both the 20 amp fast blow 240v fuses just blew in my Ten Titan 425 this evening 
while I was keying about 1200 watts on 160m. I am told that I can get Microwave 
20 amp fuses from Home Depot.

If these new fuses blow and I need to do some fault finding,  can I power up 
the psu via the rf deck with the HV cable disconnected at the psu end as I 
would want to be able to take the rf deck out of the circuit.

Any other fault finding tips would be appreciated.


73 Mark N1UK.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps