Date: Sun, 17 Mar 2013 15:37:50 -0400
From: "Roger (K8RI)" <k8ri@rogerhalstead.com>
Cc: amps@contesting.com
Subject: Re: [Amps] Coupling a blower to an air system socket
I do not know of any way to achieve the required air flow at a reduced
> back pressure other than an exhaust fan reducing the exhaust pressure thus
> making it a little easier to get more cooling air through.
I believe Emtron and OM both use this approach on some models.
## Roger why mess with two blowers in series ?? Two blower’s
in series will indeed increase the pressure, but same CFM.
## A lot easier to use the k2riw method, and reduce the pressure
requirements of the blower. Only 1 blower required.
Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|