Thanks much Carl!
73 Dwight NS9I
On 3/31/2014 1:09 PM, Carl wrote:
That choke is the same as the $20 Ameritron and works fine in my stock
tubed 76PA. Placement is a bit tight but Ive had no arcing or detuning.
Carl
KM1H
----- Original Message ----- From: "DGB" <ns9i2016@bayland.net>
To: <amps@contesting.com>
Sent: Monday, March 31, 2014 7:02 AM
Subject: [Amps] Alpha 76PA
I have recently obtained an Alpha 76PA that has the 3CX800A7's,
Vacuum Relays, and low power modification and meter modification,
apparently done by Dick Byrd N4UQ some time back.
The 12m mod was never performed and I would like some input on this.
I read an article by Mat KK5DR that this can be done simply by
swapping out the plate choke with an RFC3 from RF Parts.
Is it that simple?
thanks 73 Dwight NS9I
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4354 / Virus Database: 3722/7273 - Release Date:
03/30/14
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|