My line voltage here for my Quadra is 246 measured with an Agilent.
Doug
"Think of all the ways you can hurt yourself laughing."
-----Original Message-----
W5OV wrote:
>
>Anything approved by UL is subjected to testing at +/- 10% of nominal
line
>voltage (for 240, that calculates to 216v to 264v), and the device
should
>be able to operate over that range.
>
A very good point, Bob.
It also confirms several years of practical experience here: on a supply
that regularly rises to 250V, the Quadra has no problem whatever.
A buck-boost transformer is simply not needed.
73 from Ian GM3SEK
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|