Why not go all the way and use the 10A10 diodes?
10 Amps at 1kV, in what looks to be the same size as the 6A10.
73, Alek
VK6APK
On 10/10/2014 1:51 PM, Bill Turner wrote:
------------ ORIGINAL MESSAGE ------------(may be snipped)
On Thu, 9 Oct 2014 13:46:29 -0700, Jim wrote:
1N5408 diodes, mounted on perf-board, works fine.
REPLY:
1N5408's are OK, but for essentially the same price 6A10's have a much
higher forward current and surge current rating. I use them for
everything. Be sure you get the 1000 PIV version - they also come in a
100 PIV version. Mouser carries them.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
--
From Sunny Binningup
---
This email is free from viruses and malware because avast! Antivirus protection
is active.
http://www.avast.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|